Brief:
This is a modifided Thrustline Black Shadow. Aye aye! I converted it t' 24mm motors, arrr, 3 fins instead o' 4, me bucko, ya bilge rat, and added a tail cone and fin extensions.

Modifications:
I decided t' modify t' Black Shadow after I won it at NSL 2006. Avast, me proud beauty! I liked t' original design, but I couldn't shake the notion that it needed a 24mm motor. Ya scallywag! Well, blow me down! I really like me Estes Goblin, me bucko, arrr, arrr, and this rocket is slightly similar in size and weight. Begad!

Once I decided on t' 24mm mount, other modifications began t' suggest themselves. I figured since I was uping performance with t' 24mm mount, I might as well save 25% o' fin drag by goin' with three fins instead o' four. Begad! I liked the nose cone, me bucko, and I wanted t' make t' fins mirror t' sleek angle. Begad! Therefore, matey, I cut three four inch extensions from the fin stock. Arrr! I glued them t' t' regular fins before sandin' and finishin' them.

I then looked at t' aft o' t' rocket. Well, blow me down! After makin' t' fins sleeker, it seemed a little "clunky" the way it abruptly ended. Begad! Well, me hearties, blow me down! I came up with t' idea o' a tail cone. Avast, me proud beauty! I made a one inch cone out o' t' card stock that was used for t' fin pattern and shock cord mount.

T' only part I used in t' modification that wasn't in t' original kit, me hearties, arrr, was t' BT-50 motor mount. I used the fiber centerin' rings by sandin' them out so they would fit over t' BT-50. I inserted t' mount so that it hangs out one inch from t' back o' t' body tube, shiver me timbers, me bucko, and then glued t' cone over it.

My original idea be t' simply have t' fins stop at t' bottom o' t' body tube. Well, blow me down! However, me hearties, when I showed me wife, she said that t' rocket should be able t' stand on it's own for display. Begad! I thought about it, and t' next day I found myself cuttin' t' fins t' fit t' angle o' t' tail cone. Ahoy! Ya scallywag! It be a great move that makes t' rocket look even sleeker(Thanks Laurie!)

I then put in t' recovery system and launch lug as per t' instructions. Begad!

After sandin' and sealin' everything, I went with t' gloss black paint scheme o' t' original model (after all, it IS t' Black Shadow)

I made decals usin' our printer and Testors white backed decals. Avast, me proud beauty! T' roll pattern is from t' old Estes Streak (printed in negative) as be t' Estes logo. Aye aye! Ahoy! O' course, this ISN'T an Estes bird, so I took t' "Estes" out of the logo and replaced it with me NARRRRR number. I added two logos that say "Black Shadow SS" (SS for "Super Sport") usin' t' "He's Dead Jim" font. Well, ya bilge rat, blow me down! Once t' decals went on I noticed that t' white backed decals went a little gray on t' black rocket, shiver me timbers, arrr, but I think that just adds t' t' "Shadowness" o' t' rocket.

Construction:
T' original kit comes with a 10 inch body tube, me hearties, a very nice 5.5 inch balsa nose cone, 1/8 inch balsa stock for fins (uncut and unmarked), me hearties, me bucko, heavy card stock for t' fin patterns, fiber centerin' rings, an 18mm motor mount with hook, me bucko, matey, a length o' sewin' elastic for a shock cord, matey, and a very nice nylon chute with swivel and screw eye. Blimey! T' only part I used that wasn't in t' original kit be a 4 inch section o' BT-50 for a motor mount. Begad! I didn't use t' 18mm tube, shiver me timbers, but I did use t' engine hook.

T' quality o' t' original kit was first rate. All parts were thar and in good shape. T' only thin' that seemed to be missin' be t' certificate o' authenticity. Ya scallywag! Could this be a bootleg? I doubt it. Ahoy! It probably just got left out...T' instructions were very clear and easy t' follow and flowed in a logical order. Aye aye! O' course, me hearties, I only read them before I started since I was changin' so may things, but thar was no "gottcha's" at any point. Avast! T' rocket is very light, matey, me bucko, but still quite sturdy. All t' parts went together well. Aye aye! There were no decals included, ya bilge rat, but I actually like makin' me own more than usin' pre made ones. Aye aye! T' spirals on t' body tube were fairly obvious, ya bilge rat, but a little sealin' took care o' that. Begad!

Flight:
I would only recommend t' D12-7 for this model. Arrr! T' preparation is very easy due t' t' relatively large body tube diameter and t' engine hook. Ya scallywag! I have nay flown it yet, me hearties, but I plan t' at t' DARS Father's Day Launch. Arrr! I'll update this when I get more data. Still, ya bilge rat, basin' me expectations on t' similarity t' t' Goblin, shiver me timbers, matey, it should be quite a show!...

... Well, blow me down! long delay ...

...Anyway, I've flown it twice. Begad! Both times I used a D12-5 and got out o' sight flights....I'll try t' go through the website and do a flight record. Avast, me proud beauty!

Summary:
T' Black Shadow is a great kit in it's own right. It has first rate materials and instructions. Begad! Blimey! T' only thin' I wanted t' do was "ramp it up" a bit.

Pro's- materials, shiver me timbers, instructions, shiver me timbers, good packaging

Con's- Nay really any.

Other:
This kit got great responses at t' monthy club meeting. Arrr! Ya scallywag! I got no volunteers t' help in recovery though...