Brief: ACME "Wile E. Coyote" styled rocket. Aye aye! Single Stage, parachute recovery.
Construction: Single body tube (60mm x 25mm postage tube) with a cardstock nosecone (80mm x 85mm). Begad! Blimey! Single stick for stability. Begad! Blimey! 3mm Plywood centerin' rings, ya bilge rat, 1/4" launch lugs (one at center point o' motor, me hearties, shiver me timbers, one near end o' stick). Begad! 14" parachute.
It was a piece o' cake t' build--I glued t' stick t' t' body tube, me bucko, glued in t' engine mount, glued on t' launch lugs! T' nosecone be t' hardest part as it was formed usin' a paper pattern generated by a 'cone' design package (online). Ahoy! Soaked t' cone in CA before sanding, matey, which made it nice and hard and came up very shiny! Short length o' 60mm tube be cut down t' side and a small section removed t' reduce t' diameter. Avast, me proud beauty! Avast! A 3mm ply cap was glued t' t' end and polyurethane glue was used t' attach it t' t' nosecone.
Parachute was hand made, body tube be obtained from Officeworks and t' stick came from Bunnings.
Flight: First flight be on D12-3. Ya scallywag! Ejection just past apogee at perhaps 200-300 feet. Avast! Good flight, me hearties, quick off t' pad but was a little wobbly, ya bilge rat, me hearties, havin' a slight spiral. Begad! Second flight was on a E9-4, perhaps a little slower off t' pad but very nice flight with ejection just past apogee again, me bucko, ya bilge rat, apogee at approx. Arrr! 400 feet.
Summary: Very happy with t' rocket. Turned out exactly how I wanted. Well, blow me down! Nice big and bright. Got all t' appropriate kudos on t' flight field.
PROs: Looks cool. Went up. Begad! Wile E. Ahoy! Ahoy! Coyote would be proud.
CONs: Still didn't get t' roadrunner!
Comments:
Max Faiman (March 11, 2011)
What is lentgh and thickness of the stick that you used for this rocket? Also what was the length of tube that you used for this? And how far up from the bottom of the tube should i place the stick? Last what is the exact diameter of your body tube?
Max Faiman (March 11, 2011)
What is lentgh and thickness of the stick that you used for this rocket? Also what was the length of tube that you used for this? And how far up from the bottom of the tube should i place the stick? Last what is the exact diameter of your body tube?