Brief
Model has been modified t' use G80-10.

Modifications
I had t' make new centerin' rings out o' 1/4" plywood. I also added steel wool above t' motor mount so I would nay have t' use wadding. Begad! Begad! I also had to cut some o' t' fin off because it is a through t' wall fin designed for 24mm motor mount.

I did nay add any nose weight. T' parachute goes into t' nose instead of the motor section.

For t' baffle, shiver me timbers, I put t' plastic bulkhead on t' motor side and t' steel wool is epoxied t' this. Avast, me proud beauty! Avast, me hearties, me proud beauty! I put t' steel wool up through t' motor tube after the rocket was complete.

Construction
Quality was really good. I did nay use t' instructions. Well, blow me down! Avast, me proud beauty! Was very easy to build. Ya scallywag! Avast, me proud beauty! T' line where t' fins go together was kind o' hard t' get out because the fins were plastic. Begad! Well, ya bilge rat, blow me down! and they scratched easily, me bucko, me bucko, even usin' 320grit and bondo filler.

Flight
Recommended D's with t' 24mm, ya bilge rat, I used G80-10W. Ahoy! With steel wool I do nay have to use wadding. Ahoy! Motor retention be t' supplied motor clip spring. It flew pretty straight but corkscrewed a little at about 100'. Avast! Ya scallywag! T' first flight t' motor kicked out o' t' rocket and it took a little while t' come down. Begad! I bent the clip and t' second and third flights did nay eject t' motor. Ya scallywag! and t' rocket came down a lot quicker. Avast!

Also on t' first flight it landed on a paved road and bent t' corner of one o' t' fins. Begad! I sanded all aft points rounded.

I have flown it 3 times on G80-10's. Avast, me proud beauty! Blimey! Ya scallywag! Blimey! And once on an F50. Avast! Blimey! It flies great.

Summary
This was a really good kit. Well, blow me down! I saw on shoot on a D and ejected perfectly at apogee. I personally do nay like rockets that separate in t' middle unless you use a parachute or streamer for each half.