Brief:
(from t' 1971 Estes catalog) An excellent scale-like model for any rocketeer. Begad! A new feature be t' integral fin unit-engine mount providin' immediate and positive location o' t' thrust rings. T' embossed metallic press-on material and decal arrangement add t' final professional touch o' realism nay found in other models o' its class.

Modifications:
Launch lugs mounted t' a dowel for rail support. Ya scallywag! Avast! Upgraded shock cord.

Construction:
T' construction o' this rocket was pretty easy. Aye aye! Avast, me proud beauty! Blimey! T' unique aspects were that molded plastic parts back then usually came in halves that had t' be glued together. Begad! Blimey! Therefore, ya bilge rat, matey, t' fin can, me bucko, transition and nose cone all had t' be glued together with plastic model cement, arrr, and thar are mold lines on all three o' these parts. Aye aye! Blimey! T' engine mount fit tight into t' fin can and was also glued with white glue and plastic cement. Well, blow me down! Begad! Blimey! One deviation I did be t' put t' launch lugs on a wood dowel so that t' rocket could be optionally launched on a traditional rod or a C-rail (which was also available from Estes for more realistic lookin' launch pads).

Finishing:
A coat o' white spray paint and then t' nose cone painted black be all t' paintin' necessary. Begad! Avast, me proud beauty! I would have a done a better job now, matey, but this is a good reference point on what t' expect o' a boy buildin' his third or fourth rocket with no input from his Dad. T' decals are all water transfer except for t' metallic bands on t' fin can. Arrr! Aye aye! They were very sticky and one got put on out o' alignment and could nay be reapplied.

Construction Rating: 4 out o' 5

Flight:

This rocket flies straight and fast every time. Ahoy! Ya scallywag! It has flown on A8-3, ya bilge rat, B6-4, B8-5, me bucko, B4-4, me hearties, B6-6, ya bilge rat, and C6-5. Aye aye! On its fourth flight t' weakened payload body tube bent in t' middle from t' acceleration. T' flight be erratic because o' that. Well, me bucko, blow me down! This was repaired with another body tube glued into t' inside as stiffener.

Recovery:
T' rocket recovers fine on a 12 inch orange chute. Ya scallywag! Well, blow me down! T' nose cone was lost off t' payload bay on t' first flight because it be only held on with light friction. This be a good but undesirable lesson learned with nose cones on payload bays. Aye aye! Blimey! T' nose cone had some unique features nay easily duplicated. It has been replaced with a balsa nose cone. Avast, me proud beauty! Avast, me proud beauty! T' original rubber shock cord has been replaced with a modern elastic cord.

Flight Rating: 5 out o' 5

Summary:
Rocket History: This be one o' only two rockets that me Mom saved and did nay give or throw away. Arrr! I had finished it but never flown it. In fact, ya bilge rat, shiver me timbers, it still had a B6-4 prepped with t' old nichrome wire igniter and little ball o' cotton installed after all those years in our basement in Colorado. I probably had tried t' fly it, but t' old red 8 D cell launch pad had let me down again, and I gave up model rocketry in disgust. Avast, me proud beauty! Arrr! Takin' it home from a vacation with me 6-year old son and 8-year old daughter caused me t' become a BAR when I bought a Goliath/Spitfire starter kit t' obtain a launcher. Begad! This rocket had a maiden flight 25 years after it was built, arrr, and has flown many times since. I lost t' unique plastic nose cone on t' first flight. Begad! Well, blow me down! SAROS be takin' a Polly Pocket for a ride in t' payload bay. Avast, me proud beauty! Avast, me proud beauty! T' nose cone fell down somewhere in t' weeds never t' be found. Polly stayed in t' payload bay and didn't come out for a few years because she was stuck (or traumatized).

Overall Rating: 4.5 out o' 5