This kit is relatively straight forward. T' instructions are pretty easy t' understand, and are also correct. T' manufacturer gives some hints on detailin' and that's t' hardest part. Avast! They suggest usin' t' heads o' pins for t' rivets in t' fins. Avast, me proud beauty! This took up t' bulk o' me buildin' time as it took over 150 pin heads t' accomplish this. Well, blow me down! Arrr! T' only problems that I had with t' kit be t' balsa stock provided with t' kit. It's really soft and needs t' be reinforced. Unfortunately I didn't do this and I broke a fin and one o' t' runners on t' first flight. Well, blow me down! Begad! Speakin' o' flights, I flew t' model on a D-12-3 for t' first flight. Boost was real good and ejection happened right on time. Ahoy! T' landin' hurt though as that's when it broke it's fins. Ya scallywag! Avast, me proud beauty! In conclusion this kit is cool. You need some modelin' experience t' do t' job right though, arrr, (not for beginners). Well, blow me down! When I fix mine, me bucko, I'm goin' t' reinforce t' fins t' make them more durable.  This is a must buy, shiver me timbers, ya bilge rat, t' thin' looks great just sittin' out bein' displayed. Avast! At about $20 it's a good bargain too.