Brief:
A clone o' t' Estes Astron Birdie rocket assisted shuttlecock. Arrr! Begad!

Construction:
So thar I was snoopin' around on Rocketry Forum and somehow I ended up on eBay. Avast! This o' course, ya bilge rat, accordin' t' me wife, is all too regular an occurrence. Lo and behold I find a clone o' t' first rocket I ever owned, me bucko, t' K-44 Astron Birdie. Avast, me hearties, me proud beauty! Somehow it just seems necessary t' write a review. Avast, me proud beauty! T' manufacturer, West Wayne Rockets, does nay sell directly, however, they do sell through Uncle Mike's Rocket Shack on eBay. Avast! They are available in at least blue and red. Mine was blue. Aye aye! So what do we get for our money?

• 1 13mm motor tube
• 1 laser cut centerin' ring
• 1 1/8" launch lug
• Set o' instructions
• 1 Ziploc freezer bag
• 1 shuttle cock

Let's get this out o' t' way now. Ahoy! We are talkin' about gluin' a motor mount in a shuttlecock. Ahoy! Well, blow me down! It's kind o' hard t' mess this one up. Aye aye! T' instructions were clearly written with most every contingency covered. Avast! Absolutely nothin' goes to waste as t' donut hole in t' center o' t' rin' is used as an engine block. In fact this kit is so frugal I used t' back o' t' instruction sheet t' mix the glue and t' Ziploc bag t' store some small parts in. I prepped t' engine mount as shown, me hearties, and epoxied it in place. Avast, me proud beauty! That's it! Epoxy t' mount in, add t' launch lug, and presto, ya bilge rat, instant rocket.

While this is a skill level 1 kit, me bucko, I do want t' emphasize that I actually consider it a skill level 1.002. Begad! Begad! I did have t' fuss with t' launch lug and actually have t' use a clamp t' hold it in place while t' 30 min epoxy dried.

I did one slight modification t' appease t' safety people. I drilled a tiny hole in t' end o' t' MMT and epoxied in a 1' length o' 60# Keelhaul®©™®. I will use this t' retain motors that have functional ejection charges.

Finishing:
It's already finished and comes molded in your choice o' blue or red (at the time o' ordering).

Construction Rating: 5 out o' 5

Flight:
Ok, ya bilge rat, this one was easy. Begad! I went in me back yard and stuffed in a A10-PT (the motor for t' Blurzz® rocket powered car) hooked it up and let her rip. Strangely every birdie I've seen in t' past has been a bit squirrelly. Well, blow me down! This little one popped almost perfectly straight and almost impaled itself on the launch rod comin' back. T' same results came as I burned thru t' complete pack. Next up be t' A10-3T usin' me modified motor mount. Begad! Up she went and the pop. Avast! T' motor on t' end o' a strin' caused an unstable kind o' tumbling landing.

Flight Rating: 5 out o' 5

Summary:
Come on folks, shiver me timbers, I glued a motor mount in a shuttlecock. Avast! How can it go wrong? Still a neat remembrance and I'll probably fly it a bunch just for grins.

Overall Rating: 5 out o' 5