Brief:
I am partial t' rin' fin rockets. Well, arrr, blow me down! T' Sprite was t' first rocket I built at 11 years old. This kit will nay disappoint with its fine materials, classic form, and good looks but has a little higher price than that Sprite I built. Supposed to be a tumble recovery but more on that later.

Construction:
T' kit includes a small body tube, balsa nose cone, arrr, balsa sheet, shiver me timbers, extended engine hook, me bucko, and ring. All parts were above average quality, sturdy, me bucko, and fit well.

T' instructions were right on. Well, blow me down! Avast, me proud beauty! I used three fillets on both ends o' the fins where they attach t' t' BT and t' ring. I recommend a magnifyin' glass or readin' glasses as t' parts are small. Ahoy! I used a Dremel tool t' fine tune the fins and outer piece attach t' t' outside o' t' rin' can. Blimey! I deliberately cut t' parts a little larger and trimmed them down carefully t' t' lines. Tweezers helped too. Ahoy! I used all yellow wood glue for construction.

Finishing:
I used a water based sandin' sealer, shiver me timbers, which I did nay like but still used it. I will go back t' t' smelly sealer in t' future. Well, blow me down! I taped o' t' nose cone and the rin' can with 3M blue painter's tape. Avast! Havin' a sharp X-Acto blade is a must here. Ahoy! Gave it three coats o' Gloss orange. Begad! I had t' spray some into a old cool whip bowl and use a small calligraphy brush t' touch up t' corners. Blimey! I then taped t' BT and t' fins and left t' rin' can covered.

Three coats o' gloss white were then sprayed on t' nose cone. Well, blow me down! Well, blow me down! I let everythin' dry 24 hours before next coat. I then taped t' nose cone and uncovered t' rin' can and t' small outer detail parts outside t' rin' and fin connection. Arrr! Ahoy! I then painted it a gloss bright yellow. Blimey! All paint adhered pretty well. Begad! T' finished rocket looks pretty at least t' me.

Construction Rating: 4 out o' 5

Flight:
I only did one flight because I put too many hours into it t' lose it. Blimey! Blimey! I used a 1/4A3-2T on a calm day. Ya scallywag! Blimey! 5-4-3-2-1 and it took off and reached about 80 feet. There was a nice small smoke trail that was easy t' follow even with the rocket's small size.

Recovery:
It dropped more than tumbled into some long tall avast grass and I found it right away 20 yards from t' pad. Avast, me proud beauty! I did notice that t' engine had ejected from the rocket completely although it was supposed t' slide back and be held by the extra long engine hook. Blimey! This must have thrown off t' balance need for proper tumbling. I thought it was a successful flight. Begad! Begad! There was no damage and now it is ready for t' retired shelf.

Flight Rating: 4 out o' 5

Summary:
PROs: Nice little clone o' t' Sprite. Begad! Good quality parts. Blimey! Cute, me bucko, matey, cute, cute!

CONs: T' engine hook allowed t' motor t' exit t' rocket on ejection.

Overall Rating: 4 out o' 5