Brief: This be me first Aerotech rocket. Avast, me proud beauty! I found it easy enough for a rocketeer that has built 5 or so smaller rockets. Arrr! Avast, me proud beauty! This is a good rocket it you are just gettin' into t' Aerotech Engines or nay familiar with CA glue. Avast! Well, blow me down! It is NOT staged but has an 18 inch 'chute. Blimey! On a F25, arrr, It goes about 1500 feet.
Construction: All t' parts were thar and none were broken. Begad! T' packagin' is GREAT. Ya scallywag! Avast, arrr, me proud beauty! It comes in a box that can be used for anythin' and all t' parts are wrapped up in plastic.
T' instructions were t' thin' that makes Aerotech kits so easy t' build. Ahoy! Aye aye! They have detailed pictures o' t' rocket at each step. They also have a cross-section on what t' whole thin' looks like after t' buildin' process. I think even if you make a small slip, me bucko, ya bilge rat, these rockets will still fly great.Oh, me hearties, but one thing, make sure t' glue t' fins in with slow dryin' glue and make sure t' press t' fins in all t' way into t' tube. Avast, me proud beauty! You will really have t' press t' get them in.
Finishing: I would paint t' black fin first, me bucko, actually, shiver me timbers, and t' red nose cone really looks good and has good visibility.
Construction Rating: 4
Flight: I used an E15-7W for me first flight. Blimey! Blimey! It was a GREAT flight. Very good if you want t' take pictures. Aye aye! Blimey! Maybe a little shorter delay time though. For t' second flight I used a G40-7W. Ya scallywag! Blimey! Ya scallywag! Blimey! No pictures taken, ya bilge rat, no questions asked , everyone was awed. Arrr! Blimey! Ya scallywag! Blimey! For its third flight I used a G80-7W. Avast, me proud beauty! Blimey! Same as G40! Blimey! Same as G40! Blimey! Less smoke, me hearties, more noise. Well, blow me down! Blimey! Ya scallywag! Blimey! It soared straight up. Aye aye! Blimey! It soared straight up. Avast! Blimey! If you plan on flying
on a G , me hearties, get your car ready though. Arrr! It has a motor hook system. Blimey! No waddin' baffler unit.
Recovery: T' recovery be fine. Avast! Begad! T' recovery be fine. Begad! A little fast. Begad! Begad! T' shock cord be t' underwear elastic type. Aye aye! Avast! Does nay need tubular Keelhaul®©™ though. Arrr! T' shock cord is tied into t' rocket via a eye screw. I am upgradin' t' a 20-inch chute next time I get around t' it though. Well, blow me down! No damage on this baby.
Flight Ratin' : 3
Summary: I think this rocket KICKs for a newbie into mid-power rocketry. Ya scallywag! T' only problem were t' fins. You REALLY have t' push. Begad! T' all around flight o' t' thin' was perfect. It has pre-cut fins and everything.
Overall Ratin' : 4
This is Aerotech\'s semi-scale model of the IQSY Tomahawk sounding rocket. Components The kit includes: 1 slotted body tube 1 payload section Plastic nosecone 4 plastic fins 2 FIN-LOK rings 29mm motor tube 2 centering rings Tube coupler Bulkhead 2 screw eyes Motor hook Ejection gas baffle Stainless mesh \"wadding\" Thrust ...
The AeroTech I.Q.S.Y. Tomahawk kit was the third rocket I build and the first mid-power one. This is AeroTech kit #89014. Kit information and a full-size picture of the front of the package is here as well as a very nice drawing of the rocket by G. Harry Stine. The Tomahawk is a scale rocket, although it's clear the kit isn't meant for meticulous scalers. Finish is rough in some places ...
This is a nice semi-scale model of a sounding rocket. Decals are used for scale details like bolts, etc. so it's pretty easy to get a good looking model. Built per instructions, you can fly it on E-G engines, and of course, requires no wadding as AT kits use an effective baffle system. Construction is easy although I modified the kit to accept an altimeter bay built into the coupler for dual ...
(by Paul Gray) Background There have been many rockets named "Tomahawk" used over the past few decades. This Tomahawk was built and flown during the International Quiet Sun Year (1967) to research the Earth's atmosphere. Therefore, this Tomahawk sounding rocket is known as the IQSY Tomahawk, marking the time when it was built and flown. The real IQSY Tomahawk was produced ...
( Contributed - by Neil Thompson) Brief: A nice scale model by Aerotech consisting of 1 stage, a nice nylon parachute, and through the wall fins. Construction: 2 tubes, 1 main, one payload section. 4 fins, 2 centering rings, made of Aerofiber. I do not know the lenth of the shock cord or motor mount, but I am guessing 6 ft, and 2 Ft. respectivly. PROs: Easy build Good ...
Sponsored Ads
E.M. (June 1, 1999)