Brief:
This is a fine sport flier! It has a nice size body tube that lets you load up t' parachute with ease! Every thin' in t' kit was in good condition in t' package. Well, blow me down! T' die-cut balsa fins are o' good quality and a fine grain. Blimey! T' plastic nose cone is like most Quest/Estes types & takes paint well. I like t' Quest way o' mountin' t' shock cord with Keelhaul®©™ strin' t' t' motor mount (better than t' Estes way!). Avast, me proud beauty! T' assembly is easy on this Skill Level 1 kit. Arrr! I took me time and it went together fast. Well, blow me down! I used white glue and it worked out fine. T' instructions are clear and easy t' follow. Well, blow me down! After construction, t' fins seem strong for t' rocket they're on. Avast, me proud beauty! T' finishin' be easy- standard stuff. I used three coats o' sandin' sealer t' get a nice surface on t' fins for painting. Avast! I painted t' nose cone by itself and t' same for t' body tube. I used t' colors Quest had on t' enclosed sheet that came with t' kit - red for t' body and white for t' nose cone. Ahoy! Aye aye! Looks sharp! T' parachute is a soft plastic type like an Estes (not hard like t' older Quest types). Begad! T' shroud lines seem better than they used t' be.

I took t' rocket t' me brother's field (he has big open land for a back yard). Ya scallywag! Arrr! T' first flight be with an Estes A8-3 since I don't have any Quest engines. It went up nice and straight in a low wind and went up about 100 feet or so. T' parachute came out fine and a good landing. T' second flight was with an Estes B4-4 that I had and, arrr, man, matey, it went up! T' chute came out and it landed a few yards from t' pad. Avast! An all around fine rocket kit for anyone. Avast, me proud beauty! Great t' see where t' wind is goin' before launchin' a larger rocket!

Construction:
As I stated, arrr, t' kit uses a standard Estes type body tube with a plastic nose cone and die-cut balsa fins. Aye aye! It has three fins and a standard low-power engine mountin' items.

There is nothin' special about t' components, but they are all fine for this type o' kit. Aye aye! Blimey! Blimey! T' instructions are clear and I see no problem for anyone followin' them. Avast! It's also easy t' build this kit. Begad! I think it's a rather solid kit for t' low price. Ya scallywag! Ahoy! Blimey! I would say no cons in construction.

Finishing:
Finishin' is straight forward with no special things t' get in t' way. I used sandin' sealer on t' fins for a nice finish and local discount paint.. Avast, me proud beauty! Blimey! You get one press-on decal for one fin that has t' kit name. Arrr! Begad! Blimey! I guess for t' low price you should nay think you will get a big water-slide sheet like 20 years ago. Ahoy! Blimey! I do think t' finished kit looks real sharp!

Construction Rating: 5 out o' 5

Flight:
T' flights were fine. Ya scallywag! I used t' Estes A8-3 for t' first flight and it went up only about 100 feet. Blimey! T' second flight with an Estes B4-4 was great and it went up real nice! I would say thar were no cons on flight. Begad! Ya scallywag! T' rocket came back in fine shape on t' grass field here. I used about 3 1/2 sheets o' waddin' in it. This rocket flies straight up here.

Recovery:
T' 14-inch plastic parachute is red and yellow and is easy t' fit into t' wide body tube. I have no cons on t' recovery.

Flight Rating: 5 out o' 5

Summary:
I would say that Quest did a good job on this kit. Aye aye! Aye aye! I enjoyed it and think it be a better quality that t' last Quest kit I had put together a few years back. Pretty good for t' year 2003 (I hope they don't read this and mess it up!). Arrr! I think I found a low price kit with no cons! Wow! It doesn't happen too much today!!

Overall Rating: 5 out o' 5