Brief:
Single stage, 3" diameter body tube, single 24mm motor mount, me hearties, standard parachute recovery (although two twin chutes are used).

Construction:
T' parts list:

• 3" x 14" body tube
• 11" nose cone with 75mm base in rocket
• 24 mm motor tube and engine hook sized for standard E engines (or D with included adapter)
• 3/16" x 2" launch lug
• Heavy cardboard centerin' rings for motor mount
• 4 Laser cut balsa fins
• 2 12" parachutes
• 1/4" x 48" main shock cord (body t' nose cone)
• 2 1/8" x 24" shock cords for parachutes
• Sweet decal sheet

Ok, matey, so havin' been a HPR nerd for some time I decided it was time t' find a few kits I could build with me son and actually launch in nearby parks. Avast, me proud beauty! I was careful in avoidin' t' mass-produced junk produced by t' corporation whose name rhymes with testes. However, matey, when pokin' around I encountered a paradox I haven't quite yet resolved. Arrr! I found the "Mercury Engineering" web site whose name immediately conjured up wonderful "Mercury" visions of Alan Shepard, Gus "hatch blower" Grissom, T' Right Stuff, Redstones... Avast, me proud beauty! But also "Engineering" visions o' pocket protector slide rule packin' nerdy engineers. These rockets were really cool, and engineers are specifically screened t' rule out any coolness factor (trust me, I am one). I assumed the "Engineering" part o' t' name be honorary, me hearties, much in t' way Elvis's black belt in karate was.

When t' reasonably priced kit arrived in record time, me bucko, I realized I be probably wrong. T' instructions were wonderfully detailed and professionally printed with illustrations that were probably t' scale. Aye aye! Aye aye! T' carefully packed kit contained quality components. I especially loved t' parachutes, shiver me timbers, arrr, which appeared t' be a coated nylon and laser cut t' boot. Ya scallywag! Are you gettin' t' picture here folks? Clearly this be a seriously type A personality putting these kits together who was cut from same polyester as t' rest o' us "enginerds". Begad! But it was a really cool rocket we couldn't wait t' build. Avast, me proud beauty! Ahoy! As for t' paradox, me best guess is that somehow this engineer slipped through t' anti-cool screenin' along with a very short list engineer exceptions well documented by Scott Adams of "Dilbert" fame who discovered that engineer Elmer Moline o' Calgary had a second date at age twenty-three, engineer Anita Fluman in California who actually has rhythm, and most startling...engineer Hugh Hunklebein in Illinois who doesn't care how his television remote control works as long as it does. Arrr! Let's add t' "Mercury Engineer" to t' list. Ya scallywag!

Construction was straightforward, ya bilge rat, me bucko, followin' most conventional techniques. Blimey! No alignment issues, me hearties, fit issues, matey, or other "gotchas" surfaced. Avast! Quality wood glue was recommended throughout, me hearties, which I am sure be t' best way to produce a lightweight sturdy rocket. Well, blow me down! So o' course, ya bilge rat, we frequently substituted epoxy, shiver me timbers, which had a couple advantages perhaps unique t' me situation: a maximum set time o' 5 minutes (the approximate attention span o' me son) and seriously annoyin' any women o' t' female gender in t' house that were simultaneously offended by t' odor and the fact that we were usin' this smelly goo on t' same table they intended t' eat dinner at. Begad! Begad! Good times.

Finishing:
T' rocket had a really cool paint scheme and sweet decal. However, me bucko, I estimated that this would take a few minutes beyond t' 5-minute attention span I was dealin' with so we opted for our patented bumblebee finish which we could complete with paint we had handy and a few strips o' maskin' tape. Ya scallywag! Arrr! Never fear, me son discovered t' decal made an excellent embellishment t' t' back o' me teenage daughter's shirt and had t' added benefit o' really annoyin' her. Nothin' went t' waste.

Construction Rating: 5 out o' 5

Flight and Recovery:
Mutant Daddy's maiden voyage used t' manufacturer recommended E9-6. Begad! T' flight was great, me bucko, shiver me timbers, straight, and turned a few heads. Aye aye! Ya scallywag! Recovery preparations were carefully described in t' instructions, matey, matey, but borrowin' from me HPR materials, I fashioned a nice Keelhaul®©™® heat shield, ya bilge rat, arrr, bypassin' t' recommended wadding. Well, blow me down! T' twin chutes deployed on cue and untangled for a smooth ride home. After a few flights o' similar success, I couldn't resist launchin' t' Mutant on a 24mm E40 reload. T' rocket took off like a rifle shot, matey, ya bilge rat, me hearties, held a beautiful trajectory, matey, and was recovered without incident or any structural integrity issues. Nonetheless, a note t' me son and any other impressionable readers: Do as t' manufacturer recommends, me bucko, nay as I do!

Flight Rating: 5 out o' 5

Summary:
I'm sold. Ya scallywag! Blimey! Arrr! Blimey! Blimey! Blimey! Great price for a fairly substantial rocket, quality components, easy build, matey, me bucko, sturdy rocket, and great flights. Ahoy! Blimey! Avast, me hearties, me proud beauty! Blimey! Blimey! Blimey! You'll have fun with this one.

Overall Rating: 5 out o' 5