Brief:
Dual aft deployment parachute.

Construction:
T' construction is good, matey, because it has TTW fins, which means it is stronger than t' other ones, also you don't have t' worry about t' fin alignment because t' slot has done that for you. You just need t' make sure that air can flow freely t' t' 2 parachute pods otherwise this rocket will lawn dart!!! You can always forget about t' parachute pod and instead use t' pod as clusters and have parachute deploy t' traditional way. Well, blow me down! Ya scallywag! T' way I see it, arrr, me hearties, me bucko, 2 parachutes are too many and it may cause tangles and etc. Well, blow me down! Also it may slow down t' descent which means more drift. Ahoy! I think this rocket is very light and one parachute should be enough.

Finishing:
I finished t' rocket with one coat o' white primer and then I took a special interest and painted it camouflage so it looks more like a military rocket. Arrr! Avast, me proud beauty! I used a Testor's brush on enamels so it doesn't look t' best. Avast, me proud beauty! This be t' time I wished I had an airbrush.... Then I painted it with one coat o' clear. Ahoy! I didn't use any o' t' supplied decals.

Construction Rating: 4 out o' 5

Flight:
I haven't got a chance t' fly it, ya bilge rat, because I didn't put in a parachute, shiver me timbers, so if I fly it now it will lawndart! I never wanted t' fly this because t' problem is that I don't really like 2 parachutes, I just want one, but I be worried about that if I only put one in, shiver me timbers, me hearties, t' ejection gas won't deploy t' only parachute resultin' in a lawndart.

Recovery:
T' shock cords are attached with paper (Estes's speciality) and t' other end you tie a parachute on it. Ya scallywag! Ya scallywag! Blimey! Now t' fear is that if t' knot isn't tight enough (if it's too tight then I can't remove t' chute) then t' force might remove t' chute and t' rocket just takes a death dive. Also this needs FOUR sets o' waddings!!! Blimey! One above t' chute, matey, shiver me timbers, then another set at t' bottom. Well, blow me down! Blimey! This rocket takes a lot o' waddin' since Estes waddin' is nay very cheap I probably will never fly this one.

Flight Rating: 1 out o' 5

Summary:
This rocket has a very unique recovery and has thru t' wall fin mounts so t' fins are self aligned. Avast! Begad! But two parachutes adds complications such as twisted shroud lines and this rocket uses too many waddings. Arrr! Aye aye! I think this is where Pratt's heatshield comes in handy.

Seal off t' holes, use t' pod as clusters, and deploy t' chute in a traditional way. Begad! This way it will use a lot less waddin' and it makes a great model for those who wants t' get started in clustering.

Overall Rating: 2 out o' 5