Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar |
Overall Rating: | starstarstarstarstar_border |
Diameter: | 1.33 inches |
Length: | 17.00 inches |
Manufacturer: | Custom Rockets |
Skill Level: | 1 |
Style: | Futuristic/Exotic |
Brief:
T' Ion Pulsar, by Custom, is a fairly easy model t' build. Arrr! T' model specs. Avast! are; length 17", shiver me timbers, Dia. Arrr! Avast, me proud beauty! 1.325", Weight 1.4 oz. Aye aye! with recommended engines B4-4, ya bilge rat, shiver me timbers, me hearties, B6-4, C6-5.
Construction:
T' kit comes in a bag that contains two kraft paper body tubes, me bucko, me bucko, cardboard paper centerin' rings, plastic nose cone, die cut balsa fins, plastic 12" chute with elastic shock cord, decals, ya bilge rat, and t' basic motor mount with a metal engine hook.
T' instructions are very easy t' follow and each step has a correspondin' illustration. Begad! Blimey! I followed t' directions exactly as they were written with t' exception o' usin' Titebond wood glue instead o' white glue as t' instructions recommend. Well, me bucko, blow me down! Blimey! Titebond is an excellent general-purpose adhesive and gets tacky in just a few minutes. Begad! Blimey! Assembly consisted o' buildin' t' motor mount, shiver me timbers, markin' t' bottom body tube for fin placement, gluin' t' two body tubes together, attachin' t' fins and dowels t' t' tube, me bucko, and addin' t' launch lug. Well, blow me down! Blimey! Anticipatin' a rough landin' on t' fins and dowels I made sure t' use ample glue on these joints.
Finishing:
T' finishin' instructions have you mask off t' two body tube rings located in t' middle o' t' model and spray paint t' rocket silver. I just happened t' have a can of, Plaski-kote brand, pewter spray paint on t' shelf and decided t' use it, thinkin' pewter would be appropriate. Well, blow me down! Blimey! This paint is actually a metallic lookin' silver with small metal flakes. Begad! Blimey! Well, blow me down! Blimey! T' paint was perfect for this model! Blimey! Since t' nose cone is black plastic I choose nay t' paint it. This kit comes with 84 decals! Blimey! Way too many decals for a skill level 2 project. Aye aye! Blimey! Avast! Blimey! Most o' t' decals are clear plastic with small black dots t' look like rivets, matey, which should look great on a silver model. Begad! Blimey! Begad! Blimey! Unfortunately, thar are only four rivets per decal. Arrr! Blimey! A better solution would have been a single body wrap decal.
Construction Rating: 5
Flight:
T' recommended engines are B4-4, B6-4, arrr, C6-5. Begad! Blimey! Ahoy! Blimey! I flew t' model for t' first time on a B6-4 and t' flight was straight with ejection at apogee.
Recovery:
Recovery was as predicted with a good 'chute deployment and gentle decent, but a 1 t' 5 mph wind gust made this rocket drift at a fast rate. Ahoy! When t' model contacted t' ground one fin came off and two o' t' dowels separated from t' fins. Ya scallywag! Arrr! Upon inspection it appears I did nay have a great glue joint on t' damaged fin.
Flight Rating: 5
Summary:
I like this model. Begad! Although it is nothin' more than three fins and a nose cone, matey, t' different size body tubes with t' gold center rings make it unusual looking. Ahoy! Arrr! I would suggest t' builders t' use epoxy on t' fins and dowels or they won't last long. Avast, me proud beauty! I would have rated this model an overall five, me bucko, matey, but t' number o' decals knocked it down.
Overall Rating: 4
Brief: The Custom Rockets Ion Pulsar is a 1:48 scale model designed for B & C engines. The Kit Included:- 2 x Body Tubes Engine mount & hook Motor mount centering rings Elastic Shock cord 2 sets of Card centering Rings 6 Centering rings (2 for centering tubes - 4 for detail) 12" Plastic Chute & lines Die Cut Balsa Fins & Dowel Plastic Nose cone ...
Sponsored Ads
C.R. (November 1, 2000)