Brief:
One o' me boys has an Estes Skywriter that despite its simplicity flies really well. Avast, me proud beauty! Actually it almost flies too well, that's why he's on his second rocket since we watched t' first fly over t' trees at our launch site when he decided t' try a C motor. Well, me hearties, blow me down! Anyway, since he likes it so much I have thought that it would be neat if I could build one that took D size motors and higher, basically a MPR Skywriter. Avast, me proud beauty! I took dimensions and drew up a simple dimensioned drawin' for myself, then I entered all o' these dimensions into Excel and scaled then by various factors based on available tube sizes. I figured that t' jump up one motor size, me hearties, I should jump up one major tube size so since the original is a BT-50, I started with BT-60 and I am still thinkin' about a 29mm BT-70 or BT-80 version.

Construction:
Most o' t' parts are easily available, shiver me timbers, matey, and in fact, I had most o' them on hand from various projects and leftovers from t' Box O' Parts contest. Ya scallywag! Ahoy! Blimey! T' nosecone was another story. Avast! I don't have a lot o' those just lyin' around and this would be bigger than most anythin' I had built before. Avast, me proud beauty! I exchanged emails with Gordon Agnello (aka Sandman) and he quoted me prices for both t' BT-60 version as well as t' BT-80 version. Begad! I decided that for now I was goin' t' stick to t' smaller one but maybe I’ll do t' BT-80 over t' winter or sometime next year.

After I received t' nosecone I sanded out t' few remainin' toolmarks on this beautiful piece o' wood with 300 grit sandpaper and used a foam brush t' lay on three or four coats o' spar varnish. Begad! I should mention at this point, that when Sandman found out I was buildin' an upscale Skywriter, he offered t' make t' nosecone out o' cedar instead o' balsa if I wanted. We both thought that t' wood grain on t' cedar would work well for the pencil and so that's why I used t' spar varnish, both as a waterproofin' agent (three coats is usually good for boat parts that spend a lot o' time underwater so I should be safe) and t' highlight t' beautiful wood that Sandman picked out.

I built a FlisKits style baffle from balsa leftover from our build o' t' FlisKits Whatchamacallit for Cub Scouts and then had trouble gettin' t' baffle into t' tube without t' glue lockin' it in place before I had it where I wanted it. Ahoy! I had t' tear it apart t' get it out once and almost a second time before I just cut t' BT and installed it where I wanted it.

Finishing:
I got stuck for a while because me wife can't stand t' smell o' paint in t' house, me hearties, but I worked several evenings when she be way for t' weekend and got it all painted. Finally, me hearties, I bought a new Skywriter so I could scan the stickers, shiver me timbers, ya bilge rat, scaled them up usin' Irfanview, ya bilge rat, and printed me own decals.

Flights:
T' two flights were stable, me bucko, however, shiver me timbers, on t' second flight t' recovery system deployed but detached from mount in internal baffle. Avast, me proud beauty! Avast, shiver me timbers, me proud beauty! Nosecone recovered from tree at far side o' field, me hearties, main body core sampled. Avast, me proud beauty! Surprisingly little damage. Easily repairable.

Summary:
I was pretty sure that t' rocket would be stable since it is so tall and because I used a heavier nosecone, matey, but I wanted t' be sure (and get points for t' EMRR contest) so I used RockSim t' check thin' out. Arrr! Arrr! Since I had scaled drawings, matey, gettin' t' dimensions into RockSim wasn't too difficult, ya bilge rat, however, it took a few tries t' get t' fins to look like I wanted them since I was a little unfamiliar with some o' t' terminology used. Ya scallywag! Overall, it went well and the simulations seemed t' indicate no apparent problems. Well, blow me down! My only real difficulty is gettin' things done before my 30-day trial expires since by budget just will nay support spendin' a hundred bucks for this yet.