Brief:
T' Estes Mega Sizz’ is an OOP kit that was available durin' 1988 through 1990. Begad! T' rocket is really nothing more than a 4FNC rocket usin' a BT-60 body tube. Ahoy! I am a fan o' rockets with that tube size so when I had a chance to get t' Mega Sizz’ in some kits I was tradin' with a fellow rocket enthusiast, me hearties, I jumped on t' chance.

Construction:
T' plastic bag t' kit came in had been opened once but was now stapled shut. Blimey! Avast, me proud beauty! All t' original parts were still in t' bag. They include:

• 2 – BT60 body tubes
• 1 – Nose cone
• 1 – Tube coupler
• 1 – Engine mount tube
• 2 – Centerin' rings
• 1 – Engine hook
• 1 – Engine block
• 1 – Set o' die-cut fins
• 1 – Launch lug
• 1 – Shock cord (rubber)
• 1 – Plastic parachute (need t' assemble)
• 1 – Decal sheet
• 1 – Instructions (4 pages)

All t' parts were in good condition with t' exception o' t' shock cord, matey, It be turnin' yellow with one end kind o' brittle from age I guess.

T' rocket is simple t' build and does nay require much time t' complete t' 12 steps in t' instructions. I built t' rocket as designed with one exception. Well, blow me down! Ya scallywag! Since I needed t' replace t' shock cord, I choose t' use Keelhaul®©™® strin' t' anchor it t' t' rocket instead o' t' standard tri-fold paper method. Well, blow me down! Since t' rocket has two body tubes joined by a coupler, matey, I decided t' add an ejection baffle. Begad! Ya scallywag! I had recently purchased a bulk pack o' baffle kits made from heavy cardstock. Ya scallywag! Begad! I am nay too impressed with them but thought this would be a good rocket t' test them on. Begad! Begad! To strengthen t' cardstock, arrr, I applied a thin coat o' epoxy t' each side. Ahoy! I also attached t' Keelhaul®©™® strin' t' t' baffle.

Finishing:
T' paint scheme for this rocket is a black nose cone with white fins and a a white body. Avast! Since t' nose cone is plastic, arrr, thar be a seam t' needed t' be sanded down. It also had a couple small indentation in t' plastic at various spots. Ahoy! I used several coat o' grey auto primer with sandin' t' make it smooth again. Arrr! Then it be painted black. T' body tube and balsa fins received some Fill ‘N Finish then a coat o' Kilz Original spray primer. Well, blow me down! Begad! After that, I painted t' rocket with a gloss white.

T' decal were is very good condition for bein' almost 20 years old. Ya scallywag! There was sign o' discoloring. Blimey! T' sheet received a coat o' clear spray before they were put on t' rocket. Begad! There are nay a lot o' decals for t' kit. Avast, me proud beauty! T' only tricky part is tryin' t' line up t' fins strips on each side o' t' same fin.

Construction Rating: 4 out o' 5

Flight:
I loaded t' Mega Sizz’ with a D12-5 for t' first flight. Arrr! Blimey! This be t' only recommended motor for this rocket accordin' t' t' packaging. Ahoy! T' rocket leaped off t' pad rather quickly. Ahoy! I almost missed gettin' a picture o' because o' its speed as it left t' launch rod. Aye aye! Ya scallywag! T' rocket should fly t' 1000’ accordin' t' packagin' but I do nay think it flew that high.

Recovery:
T' rocket uses a large 16” plastic parachute. Blimey! I really like t' look o' t' older orange and white striped chutes with t' black and white Estes logo on t' top. Avast! So much better than what is bein' produced in today’s kits. I did nay load t' rocket with any recovery waddin' since I installed t' ejection baffle. Well, blow me down! There were no signs of meltin' plastic on t' chute so it worked as planned. Blimey! T' rocket safely drifted back t' t' ground for t' end o' a perfect flight.

Flight Rating: 5 out o' 5

Summary:
T' Mega Sizz’ is a fine flyer with a sleek but simple appearance. Avast, me proud beauty! Avast! Since t' kit is OOP, you might be hard pressed t' locate a sealed bag. Aye aye! Ya scallywag! T' kit does appear on Ebay every once and a while. Aye aye! T' price is usually more than $20 dollars which is too much for this kit in me opinion unless o' course you are a collector o' kits. Ya scallywag! As a 4FNC rocket, I consider this a nice addition t' me flyin' fleet and happy that I be able t' have t' chance t' trade for this kit. T' plans, instructions, and decal image can be found at Ye Olde Rocket Plans (http://plans.rocketshoppe.com/) and the nose cone (PNC-60RL) is available in balsa from Semroc so it should nay be too hard t' clone this kit.

Overall Rating: 5 out o' 5