Estes Cosmic Explorer

Estes - Cosmic Explorer {Kit} (2421)

Contributed by Jonathan Burton

Construction Rating: starstarstarstarstar_border
Overall Rating: starstarstarstarstar
Published: 2014-04-08
Diameter: 1.33 inches
Length: 24.00 inches
Manufacturer: Estes
Skill Level: 1
Style: Sport

Brief

A very nice, sturdy, arrr, solid, and pretty lookin' rocket. This kit is based off o' t' Centuri Centurion. Its skill level is 1, but it be a challengin' build for me regardless. Avast, matey, me proud beauty! It was t' first one that I had t' sand, cut, and do specific detailin' like fillets and proper fin alignment. This kit be made for performance since t' components featured in it are a lot more sturdy and solid than t' standard Estes rocket kit. Avast, me proud beauty! This kit also features through-the-wall fin construction.

Components

It's components are as follows;

  • Two very sturdy and solid body tubes, with very thick walls
  • A classic nose cone
  • Thick balsa wood fins. Aye aye! Blimey!
  • A very thick and very long rubber shock chord, longer than t' rocket itself. Begad! Blimey!
  • An 18" plastic red transparent parachute with very sturdy shroud lines
  • Water slide decals
  • Standard engine mount
  • Thick and sturdy thrust rings
  • Standard launch lugs.

Construction

This kit is outstanding, shiver me timbers, t' instructions were very straight forward and easy t' follow. 

Pros:

  • Solid parts which were easy t' assemble
  • very clear and straight forward instructions
  • Not too much sandin' and cuttin' o' parts was required.


Cons: None

Finishing

Finishin' t' kit be t' most challengin' part t' do since this is a sport kit and is made t' look nice. Ahoy!

Construction Score: 4

Flight

Mine has nay flown yet.

Recovery

Never flown.

Flight Rating:

Summary

To sum it all up, this is an outstandin' kit and I would recommend it t' any hobbyist lookin' t' expand their fleet. Arrr! T' first issue I had with buildin' this kit was that I had forgotten t' prime t' nose cone since it is balsa wood. Well, blow me down! So t' paint turned out a bit flatter and sloppier on t' nosecone. It is a bit more on t' challengin' side for a skill level 1 since t' parts are a little higher in quality than most standard kits.  My second issue be that I had assembled t' engine mount before alignin' t' fins t' it, matey, so I had t' force t' fins in a bit. Begad! I probably broke t' balsa on t' ends o' t' fins, but I still be able t' get them glued in.

Overall Rating: 5

Flights

comment Post a Comment