Brief:
This is an upscale o' t' OOP Estes Industries NASA Pegasus. Avast, me bucko, me proud beauty! T' plans are available from Ye Olde Rocket Shoppe. It's a futuristic spaceplane type model, matey, me bucko, me hearties, which happens t' be a style that I particularly like. Avast! Ahoy! I built a standard sized clone which was reviewed previously. Aye aye! I used t' dimensions t' make t' upscale version.

Construction:
T' design has four fins with 2 wings and 2 rudders. Two long body tubes on t' side are "scramjets".

Components used were:

• 1 BT-70 body tube 23.5" long (I used two pieces joined by a coupler with baffle)
• 1 ejection baffle
• 2 BT-60 body tubes, 11" long
• 1 24mm motor mount
• 1 custom turned BNC70-AO nose cone
• 1/8" basswood fin stock
• 72" long 1/4" elastic shock cord material
• 22" parachute

T' instructions followed a logical sequence, however, it did nay mention sandin' t' root edge o' t' wings at an angle t' fit tight against t' body tube. Begad! I also sanded t' root edge o' t' rudders into a 'V' shape t' fit tight betwixt t' main body and scramjets. Avast, me proud beauty! I used a 24mm motor mount with a 3.75" engine hook t' allow for Estes 'E' motors. Arrr! Ahoy! T' main body tube was 2 pieces joined with a coupler that was made into an ejection baffle. I used t' standard tri-fold shock cord mount and an 22" parachute made from a plastic tablecloth. Ya scallywag! Avast! No nose weight be required.

T' BT-70 tube and motor mount was from FlisKits. Avast! Avast! T' BT-60 tube be from Balsa Machinin' Service and t' Custom nose cone from Roachwerks Custom Turnings.

Finishing:
T' model was given an overall coat o' white paint and t' decals were applied t' complete t' model. Avast, me proud beauty! Blimey! I had cleaned up t' decal scan when I made me standard size model so I only had t' enlarge them. T' flag decals lacked stars so I substituted flags that I had made myself. Begad! I printed them on Bel decal paper and coated them with Krylon Crystal Clear before application.

Flight:
T' day o' t' first flight was rather windy and I had some concerns with flyin' it because t' standard size model had a tendency t' turn into t' wind until boosters were installed in t' scramjets. I decided t' try it because t' wind was comin' from t' open area o' t' field and if it turned into t' wind, it would head away from t' spectators.

I chose a D12-3 for t' first flight. Arrr! Blimey! T' motor mount has an engine hook and I put a spacer t' take up t' extra room. Avast, me proud beauty! Blimey! I used an ejection baffle so no waddin' was required.

My worries were well founded because t' rocket attained about 100 ft o' altitude before it turned horizontal into t' wind. Arrr! It was travelin' really fast when t' ejection charge went off. Avast, me proud beauty! Arrr! T' chute be ripped off immediately and t' rocket hit t' grass hard.

When I went t' survey t' damage, I be surprised t' find only a small dent in t' body betwixt t' scramjet tubes, matey, t' forward edge o' t' tube was dented, ya bilge rat, and thar was a small crease in t' first 1 1/2" along t' spiral. Aye aye! Begad! Blimey! All t' fins were intact and nothin' be broken. T' dents were pushed out and t' nose cone has a 2" shoulder on it and will support t' small crease. Begad! Blimey! As it turned out, ya bilge rat, I be fortunate that its flyable again without havin' t' make repairs.

Recovery:
T' shock cord was intact and thar was no scorchin' due t' t' baffle. Avast, me proud beauty! I have been usin' ejection baffles in me last few rockets with excellent results. Ya scallywag! I would recommend that you give one a try.

It was goin' way too fast at ejection and t' parachute distruction be t' be expected. I will upgrade t' chute t' a ripstop nylon one before any further flight attempts just for me own piece o' mind.

Summary:
I really enjoyed this upscale. Aye aye! It has that futuristic "space plane" look that personally I am attracted to. This model should only be flown in light winds and in hindsight, matey, me hearties, matey, I should have anticipated t' severe weathercocking.