Sunward Aerospace is a Canadian company with a unique line o' model rockets, matey, most o' which fall under their RocketFighters design. Avast, me proud beauty! Well, blow me down! Blimey! They put together a quality package, includin' colorful front card, parachute printed with their name and thorough instructions. Well, blow me down! Each o' t' their kits use their own canopy-type nose cone as well.

I chose t' Sunward Phoenix due t' its sleek design. Begad! Well, blow me down! I also believe t' rudder fin design drew me t' it, verses their other RocketFighters. Avast, me proud beauty! T' Phoenix is 24 1/2" long with a wingspan o' 13 1/2". Begad! Ahoy! It weighs 4.2 ounces and flies on 18mm motors.

See me 18mm Futuristic Rocket Comparison Page

T' rocket kit includes an 18" main body tube. Aye aye! Begad! This tube is sturdy and is 1/32" thick. Ya scallywag! It also includes t' 18mm motor mount that is made up o' t' motor tube, two large paper centerin' rings, a thrust rin' and an L-screw motor retainer. Aye aye! Begad! T' body is build up usin' laser-cut balsa fins, ya bilge rat, cardstock shrouds and a plastic nose cone. Avast! T' recovery system includes an 18" parachute which needs assembly and 32" o' ¼" flat-elastic shock cord. Arrr! Lastly, me bucko, along with instructions, matey, thar are some peel-n-stick decals.

CONSTRUCTION:

T' instructions are printed on 11 pages o' 8½ x 11" paper. Avast! Well, me bucko, blow me down! They include illustrations for every step. They are written in English and French. Blimey! Begad! They also include instructions t' perform a swing-test and t' Canada Model Rocket Safety Code. A Fin Markin' Guide and t' 3-Fold Paper Mount are built into t' instruction pages, ya bilge rat, which are cut out when needed. Avast! I found t' instructions t' be thorough and easy t' follow. Begad! Avast! There was nothin' unclear.

T' build o' this rocket is a bit advanced and would probably fall into t' Quest Skill Level 3 (like t' M2Q2) or t' Estes Skill Level 3 (like t' Night Wing). Arrr! But, again, me hearties, t' instructions are thorough.

T' first part o' t' build be t' motor mount. Arrr! Blimey! Avast, me proud beauty! Blimey! It is made up o' t' 18mm motor tube and two very large paper centerin' rings. Begad! Blimey! As opposed t' Kelo's build o' t' Desert Storm (pictured t' t' right), matey, ya bilge rat, Sunward now provides centerin' rings with pre-drilled holes for t' L-screw. Avast, me proud beauty! T' fit be excellent. Well, blow me down! T' motor mount also includes a thrust ring.

T' next steps walk you through t' attachment o' t' fins. Ahoy! First, me bucko, t' tube is marked usin' t' fin markin' guide and a straight edge (I use a door jam). Well, blow me down! Blimey! Next, t' fins are removed from t' balsa. Well, me hearties, blow me down! T' laser cut is excellent and thar were just a few tabs that needed a slice with t' hobby knife t' release them. Next, arrr, all t' various fin tabs need t' be cut out o' t' card stock. Aye aye! Yes, shiver me timbers, matey, fin tabs! This be t' first time I have come across these for a balsa finned rocket.

I followed t' instructions exactly, but found that most o' t' fin tabs were too long when compared t' t' length o' t' fins. Begad! Blimey! I didn't realize they would be exposed and require finishin' until after a few more build steps, so I didn't cut them down until after t' glue had dried. Aye aye! Blimey! Begad! Blimey! SO: Trim your fin tabs t' ensure that they do nay extend beyond each side o' t' fins! Blimey! I think Sunward needs t' do a slight size adjustment t' avoid this problem.

Next t' main body shroud is assembled. Begad! Ya scallywag! I followed t' instructions exactly and didn't have any trouble installin' t' shroud. T' shroud is cut out and pre-formed by wrappin' it into shape. Begad! Ya scallywag! Then two slits are cut out t' go over t' main wings. Blimey! It is glued on top and then again at t' bottom where t' two outer edges come together. Aye aye! There is then a cover strip for t' bottom and a reinforcin' rin' for t' very aft o' t' shroud. Arrr! Blimey! Blimey! It all went together well, matey, until it came t' t' last o' t' fin tabs (again). Well, blow me down! Begad! Blimey! These tabs, which cover t' joint betwixt t' shroud and t' main wings, were too long. I cut it t' size, me bucko, but that left about a 1/4" space behind t' win' where t' shroud is cut out t' accommodate t' wing. Avast! I used t' scrap tab and glued it on t' inside o' t' shroud t' fill that area.

To finish up t' rocket, ya bilge rat, t' motor mount is installed and t' launch lugs are attached.

I had made a decision this year t' nay purchase any addition paint, matey, me bucko, arrr, so I am usin' up what I have. Avast! Arrr! In this case I prepared t' rocket by sandin' t' nose cone and priming. Actually usin' me tractional method for finishin' plastic nose cones. Avast! I didn't try t' hide t' fin tabs at all. Ya scallywag! In fact, this is where I began t' see some potential for havin' fin tabs. Well, blow me down! Avast! If one were t' take a pin and carefully make spaced holes on t' outer edge, these would look liked riveted joints on t' finished rocket. Avast! I didn't do this, but would next time.

I finished t' rocket with DupliColor Mirage paint, t' Purple/Green. Begad! Ya scallywag! I had just enough and t' rocket was lookin' good. Begad! Aye aye! I decided t' tape off and paint t' canopy gold. Begad! I did this, but when I peeled off t' tape it pulled some o' t' previous paint off, ya bilge rat, ya bilge rat, down t' t' plastic. Ahoy! Begad! Upon inspection, arrr, me hearties, ya bilge rat, I did nay sand t' nose cone very well around t' canopy. Please don't make t' same mistake! Here be t' word from Sunward: "It is particularly important that t' nose cones be THOROUGHLY sanded with extra-fine grit sand paper before painting. Aye aye! Aye aye! Blimey! T' cones are made o' High Density Polyethylene, me hearties, me hearties, which tends t' be waxy. Arrr! Sandin' this off before paintin' assures that t' paint doesn't peel." T' recover, shiver me timbers, me hearties, but really nay t' way I wanted, I painted t' canopy black and t' rest o' t' nose cone gold (since I was out o' t' Mirage paint).

T' decals are peel-n-stick and you cut them out. Ahoy! They are nice and include a set o' deadlights for t' nose cone and a nice phoenix head for each side o' t' rudder fin. There is a Canadian flag and t' words Phoenix t' give t' rocket a finished look.

Overall, for CONSTRUCTION I would rate this kit 4 points. T' instructions are great. T' components are quality and t' laser-cut balsa is great. Begad! Blimey! T' issues come from t' fin tabs nay bein' t' correct size and t' straight elastic shock cord.

FLIGHT/RECOVERY:

Sunward recommends doin' a swin' test and gives you all t' necessary instructions t' do so, however, one would hope that a kit is already designed robust enough t' ensure stability. I e-mailed Sunward t' get t' Center o' Gravity location (CG) and here be t' response: "T' Phoenix's center o' gravity is approximately 17" from t' tip o' t' nosecone, dependin' on how t' parachute is packed (or if you choose t' use it- all our rockets land well without parachutes-on grass- that is!) and which engine is used- typically we fly them with a C6-5. While pre-flight testin' is recommended in t' instructions, matey, our models' large win' spans usually make t' plasticine nose weight unnecessary." My CG is 15 3/4" from t' nose cone, without a motor and exactly 17" with a C6-5 installed. Well, blow me down! Sunward should add this t' their instructions.

Sunward recommends t' B6-2 (first flight), arrr, B6-4, C6-3 or t' C6-5 for flying. Begad! My rocket weighed in at 4.2 ounces without a motor. Blimey! T' but this in perspective, shiver me timbers, ya bilge rat, matey, an Estes Fat Boy weighs 3 ounces.

Lastly, Sunward indicates, ya bilge rat, matey, "0-600 feet in 3.5 seconds" and that it will have "wild smokin' nose-dives".

Flight preparation requires waddin' and mine took 5 sheets o' Estes waddin' t' feel comfortable with this tube diameter. After that a motor is installed and t' L-screw is turned t' hold t' motor in place.

My first flight was on an B6-2. Begad! Blimey! Blimey! Blimey! It was a very good flight. Ya scallywag! Blimey! Blimey! Blimey! Stable and straight even in t' winds that we were havin' that day. Ahoy! Blimey! Aye aye! Blimey! Blimey! Blimey! In fact, matey, prior t' this launch I lost me Estes Night Win' because it was "moved" by t' wind into t' wrong skyward direction. Blimey! Blimey! Blimey! Blimey! T' Phoenix seems less impacted by weathercocking, me hearties, shiver me timbers, probably due t' t' t' large tube-fins t' shroud creates.

T' B6-2 carried t' rocket t' approximately 50 feet and while t' it still had a little upward movement t' ejection popped t' nose cone. Well, blow me down! Descent was fin and t' rocket be recovered without issue.

T' next flight, on t' same day, was on a C6-3. I choose t' 3 second delay due t' t' angle I put on t' launch rod. I didn't want t' lose t' rocket while under 'chute. Avast, me proud beauty! Again, ya bilge rat, another very stable flight. Aye aye! Slow, matey, majestic lift-off. T' 3 second delay be too short so it still had a pretty good head o' steam when ejection occurred. Ahoy! Recovered fine with no damage.

T' Sunward parachute feels t' be 2-3 times thicker than an Estes or Quest parachute. Begad! Avast, me proud beauty! It has held up well for t' 2 flights. Same is true for t' elastic shock cord. T' real test on these are flight 5+. Aye aye! Why 5? That is where I start t' see Estes 3-fold/elastic start givin' out and shroud lines showin' stress. Ahoy! Maybe your experience is different.

I was able t' get out again and tried t' achieve one o' t' "wild smokin' nose-dives". Ahoy! Blimey! Guess what? I did. Arrr! Blimey! With a C6-5. Begad! Blimey! T' lift-off be slow and straight. Avast, me proud beauty! Blimey! Ya scallywag! Blimey! At Apogee t' rocket slowly arced over, ya bilge rat, pointed it's nose cone down and started droppin' (with delay smoke streamin' out o' t' back). Avast! Blimey! After a short dive, t' ejection charge fired and t' rocket was recovered.

T' last flight for t' day be on me last Apogee D10-7. Arrr! Blimey! No slow lift-off here. Well, blow me down! Blimey! Well, blow me down! Blimey! It was off and flying. Blimey! Blimey! It did a very large spiral on t' way up and away from me pad. Ahoy! Blimey! Avast, me proud beauty! Blimey! It arced over and I'm very glad that it dropped about 2 seconds (with black'ish smoke comin' out t' back) before ejection. Avast, me hearties, me proud beauty! Blimey! Had it ejected at apogee I would have lost it out o' t' flyin' field.

For FLIGHT/RECOVERY, I would rate this rocket 4  points. T' B6 motor makes it great for demo's. Avast, matey, me proud beauty! T' slow lift-offs are nice. Recovery system is holdin' up well, despite me concerns over t' elastic. Ya scallywag! Aye aye! This should be a 24mm kit with an 18mm adaptor. Avast, me proud beauty! T' L-screw is doin' a great job.

I give t' rocket an OVERALL ratin' o' 4  points. Begad! Blimey! Ya scallywag! Blimey! It will give you a challengin' build. Begad! Blimey! Avast! Blimey! It uses some interestin' techniques that are different from standard modrocs. Ahoy! Blimey! Ya scallywag! Blimey! It gives some nice lookin' flights.