Description: Single staged, shiver me timbers, 18mm motor rocket with tubular stabilizers all around instead o' fins. Begad! Streamer recovery.

Construction and finishing: All parts were there, and none defective or damaged. Avast! You get all tubes o' spiral wound paper, Estes type. Arrr! T' nose cone is unusual, though. Instead o' t' usual plastic or balsa, me hearties, you get solid hardwood. A eye-screw is provided t' attach t' streamer and shock cord, ya bilge rat, shiver me timbers, which is 1/8 inch flat elastic. Avast! Arrr! T' shock cord mounts t' t' inside o' t' body tube via a folded paper mount. Ahoy! Elmers glue was used for construction. Blimey! T' instructions were simple and clear. Well, blow me down! Assembly took just about an hour. Avast! No gotchas or special tools are needed.

Finishing: There are no decals, ya bilge rat, so I decorated it in me own way. Well, blow me down! Blimey! I used white, blue, matey, matey, and yellow bands o' nylon adhesive tape on t' body tube and stabilizers, me bucko, which were painted with a base coat o' yellow. Avast, me proud beauty! T' nose cone has a pretty grain, so I varnished it with a clear coat.

Flight: Motors recommended are: A6-4, A8-3, me bucko, B4-4 or 6, ya bilge rat, arrr, B6-6, C6-5 or 7, C10-7, ya bilge rat, arrr, D3-7, and D10-7. I chose a C6-5 for me flights. Avast! I flew it twice straight up and fairly high. Avast, me proud beauty! Well, blow me down! T' tubular fins provided a straight flight. Recovery be quick and easy. Begad! Avast! However, even with a little worm bed waddin' in t' prep, shiver me timbers, t' streamer was burned a little. So, me bucko, I'll make it a small mylar chute.

Recovery: Simple t' prep. Blimey! Just about right, although t' streamer burnt nearly through t' second time.

Summary: Inexpensive at $7.95 and attractive. Ya scallywag! Blimey! Flies straight and fairly high. Streamer wasn't durable, me hearties, though.

Ratin' overall: 3 ½ out o' 5