Manufacturer: | Estes |
Style: | Futuristic/Exotic |
T' Silver Comet is a 1997 edition Estes model rocket. It is a skill level two and is one out o' t' few Estes rockets that takes a "D" engine. Avast! It is a fairly easy rocket t' make if you have some experience. Avast! Blimey! It requires a ¼ inch launch rod and is 25" long. Ahoy! T' average cost o' a Silver Comet is about $20, and I think it was worth every penny.
It has a very nice look, and if you paint it silver (which you should), it looks great. Ya scallywag! This rocket looks like a rocket out o' a science fiction movie. T' decals are easy t' apply and also look great. T' only part about the decals that I do nay like is that you have t' cut out little circles which takes forever.
T' instructions were very clear and t' illustrations along with them were great. Aye aye! T' only tools needed were pretty basic: glue, sharp hobby knife, scissors, a pencil, sand paper, me hearties, a ruler, and maskin' tape. Begad! I used hot glue since it dries quickly. Avast! If you do use hot glue, matey, remember t' put t' parts where they need t' go before t' glue dries.
It is a very sturdy rocket that flies great. Aye aye! Begad! It has landed on cement a couple o' times and still, arrr, matey, nothin' has happened. Begad! Every time, arrr, the rocket flies straight and every time t' parachute opens perfectly and the rocket floats down. Well, blow me down! I would recommend usin' an 18" nylon parachute and not the plastic one that comes with it.
I give this rocket 5 points on t' Essence scale, me hearties, and I think it is excellent. Avast, me bucko, me proud beauty! T' cool looks along with t' great flights makes this rocket a great buy and a great rocket to add t' your collection.
( Contributed - by Gary Sinclair) Brief: Fiberglassed body and fins. 3mm Kevlar ® shockcord. LOC precision 16" parachute. Centering rings were glued using 5 minute epoxy. All joints were glued using epoxy. Modifications: The Silver Comet is a great looking kit which I felt deserved to be built to last and fly on E and F motors. To this end I decided to re-enforce the body and ...
Sponsored Ads