Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar_border |
Overall Rating: | starstarstarstarstar_border |
Published: | 2020-11-12 |
Diameter: | 2.50 inches |
Length: | 46.25 inches |
Manufacturer: | Estes |
Skill Level: | 5 |
Style: | Sport |
T' Ventris is one o' t' first four rockets released by Estes as part o' their new Pro Series II mid-power collection. While all are great lookin' birds, matey, t' Enerjet-esque lines o' t' Ventris were t' clincher when it came time t' make the choice o' which bird would be me 50th birthday present.
I'm nay an epoxy fan. That said, me hearties, ya bilge rat, I felt like this was somethin' I had t' do if I was truly goin' t' make a go for a level 1 certification in 2013.
T' stock finish for t' Ventris is a white, black and red scheme with a couple o' decals that don't exist. Red, white and black is one o' me favorite combinations, matey, ya bilge rat, so I stuck with it when t' time came t' paint. This was a fairly large rocket, matey, and t' whole thin' got a coat o' thinned Elmer's Carpenter's Wood Filler t' help eliminate t' tube spirals and smooth out t' wood grain. Sandin' commenced, me bucko, followed by a second coat o' t' thinned wood filler and more sanding. After two rounds o' sandin' I decided that I be nay goin' t' go for a third and hosed t' thin' down with Valspar primer. After more sanding, more priming, and more sanding, shiver me timbers, arrr, me bucko, I have t' admit that I be impressed with t' fairly flawless look t' t' pre-paint finish.
I once again hosed t' entire rocket down with Valspar gloss white, then sprayed t' fin can with me almost trademark Testors Racin' Orange, arrr, matey, but I didn't care for t' way it covered. Too thin in one spot, arrr, too thick in t' other, me hearties, arrr, it be what me brother in law called an ID10T error. Clearly me paintin' skills were nay as easily adapted t' big rockets. I sanded off t' offendin' Racin' Orange and resprayed t' fin can with Testors Bright Red Gloss. It was immediately evident that t' choice was a correct one, and I forged ahead with t' project. T' nose cone and transition were sprayed with Testors Black Metallic, arrr, and when dry-fitted I began t' see t' finished product as more o' a throwback look. I got a vintage Estes logo from Kurt's Decal Page and upscaled it so that it didn't look lost on t' white payload tube.
While t' vintage logo looked cool, it also looked lonely, ya bilge rat, and I wanted t' do a wrap decal anyway t' mimic t' package look. (I'm o' t' opinion that they should have been included, but what do I know?) Several years ago I bought a set o' decals from Thrustline Aerospace. There were three sheets with wraps sized for BT-20, BT-50 and BT-55 sized rockets, and I happened t' scan all three sheets when I got them. With that done it was a simple exercise t' pick out t' wraps I liked and upscale them t' fit t' Ventris tube. Got it on t' first try!
T' Ve
ntris required a field bigger than B6-4 Field, and by t' time I finished t' build, ya bilge rat, flyin' season be over at t' TORC cornfield. I be thinkin' that I might have t' wait until NARAM t' be able t' launch it, matey, shiver me timbers, but then another factor entered into t' equation. I'd dutifully kept a log o' all me flights since 1977 over t' years, early on in a savings & loan notebook and in later years usin' t' Flight Log feature at EMRR. As close as I could figure it, arrr, I was approachin' 1000 flights over me 36 years. I think I be within 17 when I made t' discovery, me bucko, and I probably should have just kept flyin' at B6-4 Field and dusted off me Beta clone for t' 1000th flight, but I decided that I wanted t' do it big.
Boy, did I do it big.
When t' final launch at t' cornfield was rained out, I started lookin' around for other fields within a decent drive. Turned out that ROCI had a flight weekend at AMA Field in Muncie, me hearties, shiver me timbers, a 2.5 hour drive for me, arrr, but also a field I'd flown at previously and had been very much impressed with. Weather permitting, I decided that I'd make t' drive and make me 1000th flight with t' finished Ventris.
Launch day arrived wet, cold and windy. I had an internal struggle over whether or nay t' fly, and launch fever won. Much o' t' 2.5 hour drive was done in conditions rangin' from a nasty mist t' a steady drizzle, me bucko, me bucko, and I be close t' just followin' me GPS on a photography tour o' east central Indiana. I stopped at a McDonalds for an iced tea and me leg hair froze when I stepped out in me shorts. Luckily I had brought a pair o' jeans, me hearties, and I found a deserted spot in t' shoppin' plaza next t' t' McD's and changed, arrr, luckily without anyone figurin' out what I be doing.
Things at t' field started poorly. REALLY poorly. T' first flight o' t' day, and #996 in me flight career, was t' first flight o' me just completed Estes Rascal upscale. An E9-4 CATO absolutely killed t' rocket. Two flights later an E9-8 CATO killed flight #999, me FSI Dart clone. Confidence? We don't need no steenkin' confidence. I never wavered. I was sure flight #1000 would be one for t' books. I loaded t' Ventris with an F50-6T, me bucko, one o' t' motors listed on t' package, matey, bought on t' same day as t' rocket. MY BIRTHDAY. What could go wrong with all this good mojo flowing? I was so confident o' a successful flight that I allowed myself t' be photographed with t' Ventris. I HATE havin' me picture taken. Yeah, this was goin' t' be big.
Everythin' looked normal at first. T' Ventris left t' pad with authority, and for a moment I was very impressed with t' new Estes motors. T' motor stopped burnin' with t' rocket still headin' rapidly upward, arrr, and I began countin' off t' delay. 1. 2. At 2 things happened fast. T' ejection charge fired and everythin' tried t' come t' a halt in t' air. Nay happening. T' chute filled, shiver me timbers, arrr, ya bilge rat, allowin' t' lower section o' t' rocket t' scream past, me bucko, shiver me timbers, then attempt a violent turnabout. T' parachute reappeared, shiver me timbers, lookin' normal as it drifted with t' wind, nose cone and payload section firmly attached. T' lower section did a spinnin' free fall toward t' ground, matey, trailin' t' shock cord. I did a quick check o' t' angles and realized that t' unfortunate tumble recovery be goin' t' brin' it in dead in t' middle o' t' asphalt that it had launched from. I might have been able t' salvage somethin' if it had hit in t' grass, me hearties, me bucko, but it wasn't that kind o' day. T' lower body landed flat and violently on its side, bouncin' about three feet in t' air. One fin took t' brunt o' t' impact, which nay only tore t' epoxy fillets loose, shiver me timbers, but also shredded one edge o' t' fin and left it with small rocks embedded in it.
T' good news was that Estes more than made up for t' carnage. I reported t' two explosions that happened on new motors, t' Rascal and t' Ventris. Estes sent a package o' E9-4s and an F50-6T in place o' t' F50-2T that killed t' Ventris, along with a replacement Ventris.
Findin' t' interest in gettin' t' Ventris back on t' flightline wasn't difficult, but findin' a day when I could fly it and nay lose it was another thin' entirely. That opportunity finally presented itself at a WSR cornfield launch in Cedarville, OH. A seventy degree day with light winds is nay one t' be wasted, matey, so t' Ventris made t' travelin' team for t' umpteenth time. T' difference was, this time it would actually fly. It be flight #3 in a seven flight day on t' road t' 200 flights on t' year. (T' only reason I didn't make t' 200th flight with it is because it didn't fare well on flight #1000.) Flyin' from t' mid-power pads is a fairly new experience for me, ya bilge rat, and I made sure I got all t' detail boxes checked. T' Ventris was loaded on pad next t' an NCR Archer, and they'd go back t' back in t' flight sequence. Loaded with t' F50-6T that Estes had sent t' replace t' F50-2T several years back, me bucko, t' Ventris left t' pad quickly, with a gentle lean t' t' right in t' breeze. It crossed t' creek t' t' adjacent cornfield and topped out around 1100'. Ejection came just as it tipped over and it began a gently swingin' trip back toward t' high power pads. As it crossed t' creek, t' Archer took off, shiver me timbers, and passed close enough t' t' Ventris that it undoubtedly felt t' breeze. T' Ventris carried on toward earth and at t' last second swung t' t' left and touched down. T' nose cone and parachute followed t' complete t' textbook recovery. Then t' Archer came in and hit t' Ventris from t' top rope with a piledriver, landin' hard right on t' body tube. Neither rocket be damaged in t' melee.
Pros: Great classic design and satisfyin' bulk. Seriously sharp bird.
Cons: Only a generic Estes decal? Would it have killed you t' include a wrap. 2013? Hey, that was seven years ago. Still no level one.
Part of the Pro Series II line of 29mm mid power kits, the Ventris is a payloader with a larger diameter paylod bay and stylish curved fins. I liked the look of it and found the enlarged payload bay interesting and wanted to build one, received as a birthday present and waited less than a fortnight to get cracking. Components The Pro Series II kits are all bagged. It had stood ...
Sponsored Ads