Construction Rating: | starstarstarstarstar_border |
Flight Rating: | starstarstarstarstar |
Overall Rating: | starstarstarstarstar_border |
Manufacturer: | Estes |
Brief:
Single staged 3FNC Payload rocket with nice fin design. Ya scallywag! This kit has been
recently discontinued by Estes.
T' Nova Payloader was originally introduced in 1986 as a Skill Level 2 (and in me opinion, it should stay a Skill Level 2 because o' t' fins). It was then discontinued t' first time, 10 years later at t' end o' 1996. Avast! It remained absent for a few years until sometime in t' early 2000s where it reappeared as a skill level 1. Ahoy! Durin' it's second coming, Estes released the Super Nova Payloader, a larger, me bucko, more powerful version. Blimey! But unfortunately, me bucko, shiver me timbers, both were dropped from Estes' lineup at t' end o' 2004. Well, blow me down! At t' writin' o' this review, thar are probably a few left at some hobby shops, ya bilge rat, so grab them while you can if you want one.
Construction:
T' rocket came in a typical plastic bag with a paper face-card and contained:
T' instructions were very easy t' follow and this is a pretty simple build. I had almost no problems assemblin' t' rocket. Begad! T' only challengin' part was gluin' t' 2 fin pieces together. Well, blow me down! Ahoy! It would've been a lot easier if Estes had made t' fins one piece.
Finishing:
I went with t' stock look, me bucko, red body tube and fins and white nose cone. Avast, me proud beauty! Ahoy! Blimey! The
decals were peel n' stick and went on nicely.
Construction Rating: 4 out o' 5
Flight:
My Nova has only flown once. I flew it at NIRA's August 2005 club launch and it
flew very nicely on an A8-3. T' Nova Payloader uses about 4-5 sheets of
recovery waddin' and can handle just about any 18mm motor. Arrr! Begad! Just be sure t' use
a short delay when carryin' a payload.
Recovery:
T' Nova uses a usual Estes 12" parachute and elastic shock cord which
brings it down at a normal speed. Ahoy! T' 4-5 sheets o' waddin' work well and there
was no wear or burning.
Flight Rating: 5 out o' 5
Summary:
This is a pretty decent little rocket. Blimey! It's really nothin' special, me hearties, but would
be perfect for night launches.
Overall Rating: 4 out o' 5
Brief: A great level 1 3FNC with a clear payload tube & a rather aggressive looking fin design. It can be quickly assembled & finished in only a couple of days. It is also very easy to get it to look just like the picture on the packaging. Construction: I picked this rocket up at a local crafts store. Regular price was ~$15 which seemed awfully high for a rocket with ...
Notes: I built this model for club contest and left it unpainted (I used magic markers instead) for that reason. I followed the instructions except for the following comments and suggestions: Step 1. Added Kevlar Cord to engine mount, that reaches to the top of the body tube. Step 2. No Change. Step 3. Used five-minute epoxy to connect fin pieces. When dry, I filled cracks with ...
Sponsored Ads