Brief:
T' 13mm Stealth is a paper rocket based upon Art Applewhite's Qubit design. Arrr! Blimey! It is a free rocket and all that is needed is t' print t' design available from his website. Well, blow me down! Ya scallywag! T' basic stealth design is found here,but I used the Black Stealth variant. Avast, me proud beauty! T' only difference is that the black version is "pre-blackened" so it will print out with t' finish. Well, blow me down! T' rocket is designed t' use plugged 13mm motors and recover by flippin' over at apogee and usin' aerobrake recovery.

Construction:
T' component is really simple. Blimey! Avast, me proud beauty! It consists o' printin' out t' PDF file on a piece o' 8.5" x 11" cardstock. Ya scallywag! T' instruction are printed on t' same page. Well, blow me down! Other than that, arrr, you need some white glue, a razor knife and a straightedge. T' build is very simple.

T' first step is t' cut out t' indicated holes for t' launch lug. These are small enough that they can be cut without t' use o' a straightedge by usin' an X-Acto.

T' second step is t' cut out t' motor mount. Arrr! It is best cut out by runnin' an X-Acto along a steel straightedge to keep t' lines straight. It is then folded along t' dashed lines and t' tab is used t' glue it into a triangular prism. T' motor mount is then set aside t' form t' body.

T' body is cut out o' t' same sheet usin' t' same method. Blimey! Care needs t' be taken that only solid lines are cut--dashed lines are for folding. Ya scallywag! Arrr! When t' body is cut out (tedious), t' lines are pre-folded by creasin' along t' straightedge. Well, blow me down! Ahoy! T' three "square" pieces are then folded t' make a corner and t' shape is held by t' use o' a glue tab. Begad! T' remainder is folded into t' interior t' add strength and form an aft bulkhead. Well, shiver me timbers, blow me down! All is glued in place and t' rocket is almost complete.

T' final stage is t' insert t' motor mount through t' aft bulkhead and glue it in place. Avast, me proud beauty! Blimey! With that, construction is done.

PROs: Free, simple, shiver me timbers, and takes only 30 minutes t' build.

CONs: T' trailin' edges o' t' stealth design are tedious t' cut out. Ahoy! Several places in t' instruction refer to the rocket as t' "Qubit", shiver me timbers, t' design from which this one is derived. Arrr! (That may confuse some who wonder what a Qubit is).

I suppose it could also be painted but that would add a lot o' weight. Aye aye! Ya scallywag! T' black version is pre-finished. Begad! It's black like a military stealth vehicle. It looked fine but I did nay like t' white from the fold lines or from t' edges. Ya scallywag! That was easily fixed by applyin' a black magic marker. Aye aye! Ahoy! My Stealth be now completely stealthed.

PROs: Simple

CONs: White is just boring

Construction Rating: 4 out o' 5

Flight and Recovery:
I launched this at a club event that was almost over for t' day. Arrr! I had 2 plugged motors left so I only got t' make one flight with this rocket since I wanted t' launch another one as well. I inserted t' A10-PT and off she went. Ya scallywag! It was an impressive flight as t' rocket spun all t' way up, inverted, me hearties, and spun gently down. Begad! Well, blow me down! It spun more than t' Qubit but less than t' Scimitar.

PROs: impressive flight

CONs: Only one suitable motor

Flight Rating: 4 out o' 5

Summary:
PROs: Extremely simple, me bucko, free, me bucko, ya bilge rat, and different from all t' FNCs

CONs: None

Overall Rating: 4 out o' 5