Brief:
T' AstroCam 110 is a rocket boosted 110 camera, pretty obvious from t' name! It is a good rocket and can take some OK pictures. Begad! Ahoy! It is single staged and doesn't go very high, me bucko, matey, but it's cool none t' less.
Construction :
It came well packaged in a box and had no damage upon openin' it. Avast! Construction o' t' booster section went real smooth and only took about 45 min. Begad! T' body tube is pre-colored and it has plastic fins. Avast, me proud beauty! Aye aye! It requires no painting, just decals. Ahoy! T' hardest part o' this rocket is buildin' t' camera. Ahoy! Ya scallywag! You can do this in one afternoon, if you have quick dryin' glue. I recommend Testors liquid plastic cement for t' inner pieces and tube-type cement for t' outer shell. Begad! Silicon is used t' attach t' mirror that will point t' camera's view forward. Well, blow me down! Try very hard nay t' get any stuff on t' mirror. It is also critical that you only use a 1/2 o' a drop o' liquid glue t' attach t' camera lens. Begad! If too much glue gets on it, shiver me timbers, it will fog up and be completely useless!
Finishing:
Finishin' this rocket is just like a starter set (very easy)! As mentioned above, It is pre-colored and you just need t' slap on some decals. Arrr! Well, blow me down! You just have t' be sure that you are puttin' t' camera labels in t' right spot. Begad! Well, blow me down! T' directions will show you where t' put them.
Some modifications need t' be made before flight though. Ya scallywag! Blimey! Well, matey, blow me down! Blimey! Blimey! Blimey! I would attach as much shock cord as you can jam in t' body tube. Avast! Blimey! Blimey! Blimey! This will be explained later. Blimey! Blimey! Avast! Blimey! Blimey! Blimey! You also need t' find somethin' t' hold t' film door on with. Arrr! Blimey! Although it seems tight, you will need some tape or something.
Construction Rating: 4 out o' 5
Flight:
Since t' AstroCam is extremely nose heavy, ya bilge rat, it weathercocks a lot. Well, blow me down! Only launch t' AC in dead conditions and set t' launch rod straight up. Estes says t' only use t' C6-7. Avast! T' 7 seconds before ejection is too much, matey, shiver me timbers, I used t' C6-5. Avast! That will give you a nice horizon shot, matey, maybe lower. Begad! I'm sure you would get good results from an 18mm D engine with a 5 second delay, too.
Recovery:
Since t' Astrocam has time t' turn around, me hearties, it is goin' very fast. Avast, me proud beauty! This is where t' extra shock cord comes in. Arrr! Ya scallywag! When t' 'chute catches, it yanks t' rocket pretty hard which can damage it. Begad! Aye aye! T' rocket hits pretty hard with t' small 12" parachute provided. Well, blow me down! I would either make it recoverable in two sections, ya bilge rat, or install an 18" nylon 'chute.
Flight Rating: 2 ½ out o' 5
Summary:
I hope your experience won't be a bad one with t' AC. Begad! Blimey! I have yet t' finish a whole roll o' film yet and I have t' repair me rocket from it's last flight. Ya scallywag! It kind got RAGD (Rapid Air t' Ground Disassembly). Good luck and happy flying!
Pro's: T' rocket is a fairly easy project, matey, makin' it good for all ages.
Con's: T' rocket is very difficult t' tame. Avast, me proud beauty! I've only had two successful flights so far.
Overall Rating: 3 ½ out o' 5
Darrell Millner (February 22, 2020)
I recently found my old Estes Astrocam 110 #1327, new in the box. Before I start my build 2 questions,
1- has anyone developed a digital option? 110 is rather troublesome to develope.
2- I had a friend years ago reverse the camera to get photos down the fuselage- they were Great shots. Anyone else do that?