Brief:
This is a small little rocket that uses featherweight recovery. Avast, me proud beauty! It is a fun little afternoon or class project. It is hard t' recover since it's so small. Aye aye! Well, me hearties, blow me down!

Construction:
It is basically a flyin' engine mount--an 18mm body tube with a balsa nose cone, 3 balsa fins, me bucko, matey, and an 1/8" launch lug glued t' it. Avast, me hearties, me proud beauty!

T' instructions have no need for pictures because this kit is so easy a person with no experience could make it. All you need is some Elmer's glue and that's it. T' tube is marked with t' lines for t' fins and lug. Well, blow me down! Arrr! T' fins hold pretty well without any special tools. Arrr! I be able t' put 2 o' these rockets together within 30 minutes at t' YMCA's snack room in me spare time. Ya scallywag!

Finishing:
I screwed up paintin' it and makin' it into a mess, but if someone would just dust some paint on, any color, it looks like a neat little rocket. No decals are included.

Construction Rating: 5 out o' 5

Flight:
T' motor seems t' stay in pretty well. Aye aye! This kit will take a 1/2A6-2, shiver me timbers, matey, me bucko, A8-3, ya bilge rat, arrr, B6-6, and a C6-7. Ahoy! I used an A8-3 since it all I had from another kit. Avast! It be a bit windy so I tipped t' rod a little bit. Blimey! Avast, me proud beauty! It flew straight--to t' left! All that be left be t' wadding...(but don't use waddin' in this kit). Avast! Begad!

Recovery:
T' problem with this kit be t' same with almost all tumble recovery kits: they're almost impossible t' find afterwards.

Flight Rating: 3 out o' 5

Summary:
I think this is a good kit if you have nothin' else t' do and you only want t' get about 1 flight out o' this kit. Aye aye! It would be a good kit for a school project since it's so cheap. Well, blow me down! Once again, you'd probably never see this rocket again after you launch it.

Overall Rating: 3 out o' 5