| Construction Rating: | starstarstarstar_borderstar_border |
| Flight Rating: | starstarstar_borderstar_borderstar_border |
| Overall Rating: | starstarstarstar_borderstar_border |
| Published: | 2020-03-18 |
| Diameter: | 0.98 inches |
| Length: | 26.50 inches |
| Manufacturer: | Estes  |
| Skill Level: | 1 |
| Style: | Multi-Stage |
Brief
Two-stage Estes level 1 kit
Components
- 2 plastic fin units
- Plastic nose cone
- BT-50 body tube & first stage tube
- 2 18mm motor mounts (no hooks)
- 2 pc launch lug
- 12" parachute
- 1/8" shock cord
- Self-stick markings
Construction
Very easy assembly with plastic and white glue
Traditional tube launch lug instead o' new plastic double end lug used on other E2X kits
Have t' be careful in scrapin' paint off body tube t' glue launch lug
Nose cone is very loose and had t' add 2 strips o' maskin' tape t' tighten it up
Finishing
No balsa fins means no sandin' and sealin' required
All parts are pre-finished, no paintin' required
All markings are self-stick
Could use a couple o' more stickers for t' fins
Flight
Maiden flight usin' B6-0/B6-6. Ya scallywag! Pre-flight prep be simple.
Launch day conditions with slight breeze, so angled launch rod into t' wind 5 degrees.
Added brass snap swivel for connection o' shroud lines t' nose cone
Added fire retardant blanket t' protect chute in lieu o' wadding
Booster stage did nay tumble and came straight down, augerin' into t' dirt
Parachute deployed on upper stage and recovered 500' behind launcher
Summary
If you want a simple kit t' get out and launch quick, t' Mongoose is great. It is a very high flier, so recommend field size at least 1000'x 1000' with B's and double that with C's and you'll really have t' keep an eye on it or it will disappear.
Other Reviews
- Estes Mongoose By Alan and Duane Boldt (July 14, 2010)
This review is for the 2010 EMRR Challenge "Two on One" review. Duane Boldt and Alan Boldt contributed to this review. Alan: This 26.5" 2-stage rocket is purple and yellow with cool decals. It is easy to build and there are not many parts. The Mongoose has plastic, one-piece fin units on both the booster and sustainer. Components: 1 - 18" Purple body tube 1 - 2" Purple ...
- Estes Mongoose By John "MAX" Venable (September 13, 2009)
This is a entry-level, two-stage ro cket with parachute recovery. The kit is a basic two-stage consisting of upper and lower body tubes, nose cone, molded plastic fins, and a basic recovery system. Construction was easy, but once again I had to tweak it! I heard that the upper and lower tubes around the motor mounts was weak so instead of centering rings, I filled the upper and lower tubes ...
- Estes Mongoose By David Sindel (January 15, 2009)
This is a fairly simple 2-stage, 18mm rocket from Estes. I have slightly modified mine with shortening and a modified booster motor mount to repair damage. The parts list: 18" of BT-50; mine only has 10" left. 1-15/16" of BT-50 for booster 2 magenta plastic fin units PNC-50YR: 2-part magenta nose cone 2 blue 18mm engine mount tubes of rather poor quality 2 green ...
- Estes Mongoose By Nick Esselman
I originally purchased an Estes' Mongoose Kit because I wanted to use it for an experiment, however, when my 8 year old nephew came to visit it seemed like a good kit to build together. So we built it. The instructions have lots of illustrations, however, that didn't help us fully understand how to assemble the lower stage's motor mount. I think the problem starts in the first step when ...
 |
 |
Flights
Sponsored Ads
|
|