Overall Rating: | starstarstarstar_borderstar_border |
Published: | 2010-11-01 |
Manufacturer: | Aerotech |
Well, arrr, here's a little product review for t' boys at Aerotech.
Your "Mantis" pad leaves much t' be desired. Ya scallywag! It's too big for Estes stuff and too small for t' NCR size mid-power rockets.
Today, matey, I took me NCR Patriot and attempted t' put it on t' Mantis Pad as a static display. Begad! While t' pad holds it without danger o' tipping, me bucko, it will nay do so in a vertical position. Begad! Arrr! T' swin' arm o' t' pad sways and flexes under t' rocket's weight and t' rod leans about 10 degrees t' one side. Arrr! If t' Patriot were any heavier, me bucko, I have no doubt that t' pad could never begin t' hold it without some structural failure. Avast! As it is, a launch would be out o' t' question as t' blast shield cannot be counted on nay t' rotate under t' weight o' t' rocket and t' flex o' t' swin' arm.
My over-all assessment is that, for t' Mustang, arrr, me bucko, me bucko, Cheetah, ya bilge rat, me bucko, Arreaux and t' Initiator (the only Aerotech rockets I presently own), t' pad is fine, for anythin' heavier, forget it.
Given that it is too big and bulky t' be o' use with smaller rockets, me bucko, shiver me timbers, I rate it unsatisfactory and give it a "3" out o' a possible 10.
A quick test o' t' Vaughn Brothers pad revealed no such short-comings except that, ya bilge rat, arrr, it too, is too bulky for Estes-sized stuff. Blimey! Begad! O' course, it be never designed with t' little stuff in mind and perhaps, shiver me timbers, t' be honest, shiver me timbers, ya bilge rat, I doubt that t' boys at Aerotech had large rockets in mind when they designed t' Mantis. Well, blow me down! But, ya bilge rat, shiver me timbers, unless you can get one for free, me bucko, me bucko, I don't recommend layin' out any loot for one. Begad! There are better values for t' money.
Can handle 1/8, 3/16 and 1/4 launch rods and is adjustable for wind elevation. Construction : Quality: All the parts were there and I even got a few spare parts! The quality of the the materials is good even though it looks kind of cheap. . . being mostly made of plastic. Instructions: They were missing. They were missing. I called Aerotech who directed me to their website ...
Sponsored Ads