It seems t' be popular t' "trick out" cars t' make them look meaner, faster, arrr, cooler. Arrr! Blimey! Even though a car that is truly "tricked out" is meaner and faster with performance enhancin' equipment, however, ya bilge rat, "tricked out on a budget" is t' make a car look meaner and faster, instead.

Rowes Cone Retainers could be considered a way t' "trick out" a rocket t' make it look meaner, me hearties, arrr, faster, me hearties, and definitely cooler! Blimey! They don't add t' speed or performance, me hearties, ya bilge rat, but they are more than just a pretty ornament. Ya scallywag! Ahoy! They hold your precious (and expensive) motor cases in place!

My experience is with two o' Rowes Retainers; t' 24mm Cone Retainer and t' standard 29mm Retainer. I have 2 more 24mm Cone Retainer sets on order.

CONSTRUCTION (24mm Cone):

I used t' 24mm Cone Retainer on me Fat Cat Rockets Galactic Marauder. Well, blow me down! Begad! This required pre-plannin' because t' attach t' 24mm retainer base, me hearties, me hearties, thar needs t' be 1/4" o' motor tube exposed. Begad! On t' Galactic Marauder, arrr, t' fins and pods are mounted flush with t' end o' t' 24mm motor/body tube, so I had t' move everythin' up 1/4". Avast, me proud beauty! Begad! This shortened t' final depth that t' tail end would be inserted in t' t' main body tube.

For a scratch-build or other kits, you will probably nay have any trouble addin' t' 24mm base, ya bilge rat, just be aware that it needs 1/4" o' tube exposed.

To attach t' base, shiver me timbers, matey, I scored t' inside t' rough up t' aluminum surface a bit, me hearties, ya bilge rat, I sanded t' 24mm motor tube, me hearties, me bucko, and then used 15-minute epoxy t' put it all in place. Arrr! No problem. Avast, me proud beauty! Blimey! Obviously avoid gettin' epoxy on t' threads.

If you are addin' this t' a kit, then you will also need t' add nose weight t' compensate for t' extra tail weight.

I painted t' base t' same color as t' rocket. Avast, me proud beauty! T' do this be sure t' wrap tape around t' threads t' keep tape off o' them. Aye aye! Avast! When all is done, look!

CONSTRUCTION (29mm Standard):

I used t' 29mm standard Retainer on another Fat Cat Rocket, t' I.P.F.I. Blimey! Ahoy! Strikeship. Arrr! Ya scallywag! T' 29mm standard Retainer did nay require any pre-plannin' since it attaches t' t' aft centerin' rin' o' t' rocket. Arrr! Aye aye! NOTE: t' aft centerin' rin' needs t' be flush with t' motor tube end for this retainer t' work!

T' retainer is very easy t' add. Ahoy! Blimey! Drillin' two small holes, screw in t' base mount inserts and then screw t' retainer on with provided Allen screws.

T' anodized red finish makes it stand out on t' finished rocket (dependin' on your color choice).

FLIGHT/RECOVERY:

T' 24mm Cone Retainer is simple t' use in t' field. Simply unscrew t' cone, shiver me timbers, insert motor, and screw cone back over. Begad! Begad! With Aerotech 24mm RMS cases it does nay screw down all t' way (very close though). Ahoy! It had no problem holdin' t' motors in.

I have used it twice with Blue Thunder motors so thar was nay much o' a flame. Avast, me proud beauty! I'd love t' get a picture with it on a White Lightnin' motor, but for now I'm on pause because me retainer is hangin' in a tree (along with t' rocket and me RMS casing)!

T' 29mm Retainer requires that you have a small Allen wrench with you t' attach or remove t' ring. Begad! I have used it twice, matey, me hearties, as well. Once with an F50 Single-use motor and once with an Aerotech 29mm 40/120 RMS casing. It is very easy t' work with.

SUMMARY:

My experience make with Rowes Retainers, with t' actual product, matey, has been outstanding. Arrr! A couple other o' comments need t' be made for full consideration:

First, matey, I got me first set o' retainers in approximately two weeks. Well, blow me down! T' second set though... Avast! Aye aye! has been over two months! This isn't Rowes, it be t' U.K. Ya scallywag! t' U.S. Avast! mailin' system! I confirmed this with me > 2 month wait for me Caveman MicroHybrid.

Second, "tricked out" cars, and rockets, arrr, add expense. Arrr! Blimey! T' 24mm Base/Cone has a current price o' $31.50. Begad! Blimey! T' standard 24mm would be $19.50. Aye aye! Begad! Blimey! T' standard 29mm Base/Retainer has a current price o' $16.50. Blimey! T' Cone version o' t' 29mm is $34.50.

So, if you really want t' make your rocket look meaner, faster and cooler as well as have t' functionality o' a motor retainer, arrr, then Rowes has your answer. Ya scallywag! This is especially true o' Rowes Cone Retainers! I give t' two retainers I used an OVERALL ratin' o' 4 ½ points. If would be great t' get a U.S. Begad! Begad! distributor as well as work on gettin' t' price down.... Aye aye! but, me bucko, hey, arrr, if they were cheaper everyone would have a "tricked out" rocket!