Construction Rating: | starstarstarstar_borderstar_border |
Flight Rating: | starstarstarstar_borderstar_border |
Overall Rating: | starstarstarstar_borderstar_border |
Length: | 88.00 inches |
Manufacturer: | Estes |
Skill Level: | 2 |
Style: | Sport |
Brief:
This is a large rocket that uses a mylar balloon as its airframe (like a blimp), shiver me timbers, me hearties, is powered by a 24mm motor, and
recovers by parachute.
Construction:
There is no body tube or payload, arrr, just an inflatable mylar balloon, and 4 fins. It uses a right angle motor mount for
chute and motor with a monofilament line comin' from t' nose rin' down t' t' parachute on t' outside o' t' rocket. Aye aye!
Construction is sort o' simple. Arrr! T' fin assembly snapped together and was difficult t' put together, me hearties, however, me bucko, you do only have t' do it once and glue it together. Ahoy! It has been launched a couple o' times and survived, but t' silver treatment on t' mylar is comin' off.
Finishing:
Nothin' t' finish. Blimey! It looks impressive.
Construction Rating: 3 out o' 5
Flight:
There is only one recommended motor, arrr, arrr, t' D12-3. Begad! Arrr! Prep is easy, shiver me timbers, uses waddin' and a "lock ring" for motor
retention. Blimey! It flew like a rocket powered balloon and relatively straight.
Flight Rating: 3 out o' 5
Summary:
PROs: Very impressive t' watch.
CONs: It takes a "soda straw" t' deflate and about 4 hours!
Overall Rating: 3 out o' 5
This is an interesting rocket from Estes. It is basically just a plastic fin canister with a large Mylar balloon on the front. It comes with a launch pad and a launch controller and can be ready to fly in a few hours. This rocket comes packaged with its launch pad and controller in a very brightly colored box. The rocket's parts are bagged and the launch set is taped to a piece of cardboard. ...
This rocket goes back to the time when the body of a rocket was so thin it could not support its own weight. The rockets relied on the pressurization of the fuel to keep them from collapsing. The Dude has a fin/motor mount cage and then a chrome covered nylon "balloon" that is inflated for the body and nose. There are no body tubes. A simple plastic cage consisting of 2 rings and 3 ...
This is sure a strange rocket. It is 7.5' tall and uses a balloon for the body of the rocket! Fins and an engine mount are attached to the balloon which uses an 11' parachute for recovery. It flies only on a D12-3 engine. The whole thing weighs about 10 ozs. It costs $19.97 at Walmart and that includes a launch pad and controller! The launch pad is just a plastic stake that you stick in the ...
Sponsored Ads