| Construction Rating: | starstarstarstarstar_border |
| Flight Rating: | starstarstarstarstar_border |
| Overall Rating: | starstarstarstarstar_border |
| Published: | 2015-01-24 |
| Diameter: | 3.00 inches |
| Length: | 41.50 inches |
| Manufacturer: | Estes  |
| Skill Level: | 5 |
| Style: | Sport |
Brief
This is a Pro Series kit that is four fins and 3" diameter. Well, blow me down! Well, blow me down! It is designed for E, shiver me timbers, arrr, F, and G motors.
Components
T' parts were good. Blimey! Arrr! T' fins are plywood while t' tubes are cardboard and t' nose cone plastic like most kits this size today.
Construction
No real cons on t' construction other then t' shock cord attachment. If done right, I'm sure it would work great for a long time. Avast, me proud beauty! I just prefer Keelhaul®©™ from t' motor mount t' just out o' t' BT.
Everythin' went together just fine.
Finishing
Haven't finished it yet. Arrr! Still flyin' naked.
Flight
Love this rocket. Well, blow me down! Begad! Most flight are on 29/40-120 reloads in t' G range. Avast, me proud beauty! Avast! I have had three flight on H motors, me bucko, shiver me timbers, up t' an Aerotech 3 grain H250G-M. It holds up very well and flight straight and true on t' large motors.
Recovery could be an issue on small field with t' large motors, it does get way up there. Begad! Even light breezes can take it a long way off when it gets 1/2 mile high on a high power motor.
Recovery
No real cons on t' recovery, other then it goes a long way when flyin' on H motors. Begad! Aye aye! It gets a lot o' altitude and winds are always stronger t' higher you go. Avast! Even on a calm day at t' surface it can drift a long ways if you put an H motor in it.
Summary
This is a really cool kit. Avast! Blimey! If you put big motors in it, do that at a large field.
Other Reviews
- Estes Leviathan By Robert H. (July 2, 2013)
This is the Rocket that I have chosen to do my level 1 NAR cert with. Components A Pro series kit, it has nice wood fins and sturdy construction. /h2 I built this rocket with the intention of flying large 29mm reloads in it so I used epoxy on everything. I made a aluminum ring that sits about 2\3 down the body tube with a hole in the center. ...
- Estes Leviathan By Curt Hillier (March 6, 2013)
Curt Hillier's Flaming Leviathan Components Standard build of the Estes Pro Series II kit. Elmer's carpenters wood glue as adhesive. /h2 Kit instructions were clear. Migrating to mid-power using Estes Pro Series II kit was easy. Finishing I didn't use the kit decals as the style was a bit boring. I painted the body black and then ...
 |
 |
Flights
Sponsored Ads
|
|