Brief:
This odd-roc is an hourglass-shaped, me bucko, incredibly (and some might say surprisingly) stable, small field flier. Begad! Blimey! Very easy t' build and entertainin' t' fly.

Construction:
T' parts list:

• One brightly colored pattern sheet (hot pink in me case)
• One sheet o' foamboard
• 24mm engine tube
• Engine hook

I wasn't quite sure what t' expect when I found that I'd be reviewin' this product, arrr, matey, but shortly after findin' out, I be sittin' on t' floor in t' family room with me buildin' tools strewn out around me. Avast! Ahoy! Had I nay been aware o' Art's reputation before startin' construction, I may have had some reservations but I've been eyein' his saucer rockets for a while and had kept up on t' reviews o' his other products. Avast, me proud beauty! Ahoy! Art's saucers, me hearties, cones and other assorted flyin' shapes are supposed t' be easy t' build and fly and apparently all o' them deliver. Begad! I expected nothin' less from this one.

Instructions were well detailed and illustrated and mention right off t' bat that you should READ THE INSTRUCTIONS BEFORE STARTING CONSTRUCTION! Do it. Aye aye! You'll be glad you did because this isn't like any kit you've previously built. Blimey! Begad! (Unless, me hearties, o' course, me hearties, you've previously built a 24mm Hourglass rocket!) Despite t' fact that it was Friday and I wanted t' launch it t' followin' Sunday, I paid special attention t' his construction tips, ya bilge rat, shiver me timbers, especially "Take your time and pause betwixt steps t' let t' glue dry". With that advice heeded, I spent Friday night cuttin' out t' cardstock parts, matey, wrappin' t' cones, arrr, and gluin' t' top and bottom patterns t' t' foamboard backing. Arrr! I used a thin layer o' Elmer's Wood Glue t' attach t' pattern t' t' foamboard, ya bilge rat, me hearties, then left it t' sit under some bookends overnight. On Saturday mornin' I be able t' cut t' top and bottom pieces out and proceed with t' rest o' t' project. Arrr! It went together smartly from this point. Avast, me proud beauty! I used cellophane tape t' hold t' top and bottom cone pieces in t' shape I wanted them, matey, then used gel CA t' close them up in a more permanent fashion. T' stories about me gluin' myself t' said cones are just rumors. Ya scallywag! Begad! (I'll eventually get even with me wife for spreadin' them. And for laughing.) After this, me bucko, arrr, it's just a matter o' makin' sure t' launch lug holes line up and checkin' your glue fillets. Begad! I could have flown it before lunch if I wanted to.

Finishing:
Finishing? What's your pleasure? If you don't answer sanding, me hearties, sealin' and painting, then this be t' kit for you. Avast, shiver me timbers, me proud beauty! My Hourglass was a high visibility hot pink and I had no intention o' messin' with it beyond sprayin' t' hot pink parts with a coat o' clear. Begad! I guess you could use a permanent marker t' personalize it, but I just kept mine as it be intended. Arrr! I may start markin' each flight with a slash (ala t' notches in a gunfighter's pistol grips,) but other than that I'll just let it age gracefully.

Construction Rating: 5 out o' 5

Flight:
Flight #1 was on a conservative engine choice, t' Estes C11-5. Well, blow me down! T' field we were flyin' on is a nice, flat group o' four baseball fields, but t' area is also ringed with trees and homes, shiver me timbers, so I went t' conservative route. Aye aye! Blimey! I needn't have worried. Aye aye! Ya scallywag! Blimey! T' rocket boosted straight up t' a height o' maybe 150-200' with lots o' noise and smoke announcin' our presence t' a group o' Labor Day partiers in a nearby backyard. Blimey! Blimey! At ejection it began flippin' and tumblin' back t' earth, landin' on t' hard packed dirt o' one o' t' ballfields. Arrr! Avast! Blimey! There be some slight damage incurred when t' bottom foamboard circle hit t' infield but it was only a slight bend and I didn't think it would cause problems.

Since t' C11 flight had done so well, I decided t' go with me lone D12-5 for t' second flight. This flight was a carbon copy o' t' first, though somewhat higher. Avast, me proud beauty! Blimey! T' difference with this flight be at ejection, me hearties, when t' motor's extra healthy ejection charge caused it t' partially blow past t' aft o' t' engine hook. Well, blow me down! (One o' several ejection charge difficulties we encountered on t' day.) Once again, t' neighborin' drunks had somethin' t' say at t' sound o' t' ejection charge, shiver me timbers, but they sounded pretty potted despite t' early hour and I didn't anticipate any trouble from them.

Flight #3 be again on a C11-5 and be just like t' first, but with a softer landing. Aye aye! We stopped at this point but only because o' t' heat and humidity. Well, blow me down! Well, blow me down! (And t' fact that a bunch o' our OTHER rockets had been damaged by t' aforementioned overenthusiastic ejection charges in t' Estes engines.)

Recovery:
Recovery can be tough because you sometimes have t' walk as much as fifty feet t' retrieve t' Hourglass. Aye aye! (What is this world comin' to?)

Flight Rating: 5 out o' 5

Summary:
T' Hourglass rocket is a fun project that builds smartly and results in a great performer for a small field near you.

PROs: Has t' potential t' be an overnight build and fly. Avast, me proud beauty! Unusual looks. Impressive performance that never gets out o' your line o' sight.

CONs: Had trouble color coordinatin' me outfit with t' hot pink. Avast, me proud beauty! (In other words, ya bilge rat, NONE!)

Overall Rating: 5 out o' 5