Brief:
Scale rocket o' t' Russian SA-2 SAM Guideline. Ahoy! Lots o' fins and detail. Begad! Very easy build for anyone who has built a Scale Kits rocket before.

Construction:
T' kit comes with 2 very thick body tubes, a balsa nose cone and transition, shiver me timbers, laser cut plywood centerin' rings, matey, me hearties, basswood for all 16 fins, matey, popular conduits, arrr, very nice nylon parachute, nose weight, and sturdy shock cord. Arrr! T' only thin' missin' would be some kind o' positive motor retention.

Scale Kits' instructions are some o' t' easiest I've ever read. Well, blow me down! Ya scallywag! They're on par with most Estes' kits. Aye aye! Diagrams are large and easy t' read. Avast! Blimey! You end up cuttin' t' instructions apart t' get t' fin markin' guide, so if you'd like t' keep t' instructions intact, ya bilge rat, make a copy o' that page.

T' hardest part o' buildin' this kit be gluin' and alignin' t' 16 fins. Aye aye! Aye aye! As long as you take your time and make sure all 16 fins line up, me bucko, it'll end up a very nice rocket. Well, shiver me timbers, blow me down! I be curious how t' ejection gases would go through t' transition before I built t' kit, but it comes hollowed out and t' motor mount is attached t' t' middle o' it and actually makes this kit stronger.

Finishing:
T' body tubes have virtually no spiral t' fill. Blimey! T' fins were sanded and filled with sandin' sealer. Begad! T' balsa nosecone and transition soaked up 5 coats o' sandin' sealer and were still askin' for more. Ya scallywag! I finally decided t' just fill t' grain with several coats o' primer with sandin' betwixt each coat.

Scale Kits included some waterslide decals that applied very well. Ahoy! Avast, me proud beauty! I had t' search t' Internet for a good paint scheme I liked. Avast, me proud beauty! I ended up with flat navy gray with black/silver nose cone. Blimey! T' conduits were painted black. Well, blow me down! T' strakes were yellow and white. Well, blow me down! This be as close as I could come t' t' actual Russian rocket.

Construction Rating: 4 out o' 5

Flight:
After buildin' t' rocket, me hearties, ya bilge rat, I built it in RockSim t' find t' CP. Ya scallywag! I marked t' CP and tested t' CG. Avast, me proud beauty! After findin' that they were too close for me liking, arrr, I added more nose weight. Blimey! T' list o' recommended motors is nay t' biggest but nay short either. Well, blow me down! Ahoy! I had a G64-7 reload already on hand so I decided t' use that. It turns out that I should have used either a smaller reload or added more weight t' t' nose. Blimey! T' rocket went up straight for 100 t' 150 feet, me bucko, arrr, made a 90 degree turn, and started a horizontal loop. Ya scallywag! Arrr! After one complete loop, it turned towards t' ground and buried itself. Ahoy! After talkin' with several other rocketeers onsite, it looks like it got it's initial stability from t' rod, lost it after t' first 100 t' 150 feet, ya bilge rat, and then gained it again as t' motor burned out. Well, blow me down! Avast! T' rocket was totally destroyed.

Recovery:
I loaded t' rocket with a Nomex blanket and packed t' parachute with a little baby powder t' ease ejection. I think it would have ejected clean and floated gently t' t' ground if it wasn't already 3 inches deep into t' earth when t' ejection charge went off.

Flight Rating: 3 out o' 5

Summary:
This rocket looks stunnin' on t' pad and has t' potential for beautiful flights on smaller motors. Avast, me proud beauty! Well, blow me down! I wouldn't use anythin' above an F motor in this rocket and add additional nose weight t' increase stability.

Overall Rating: 4 out o' 5