Aerotech Initiator Starter Set
Aerotech - Initiator Starter Set {Launch/Starter Set}
Contributed by Chris Bovia
| Construction Rating: | starstarstarstarstar_border |
| Flight Rating: | starstarstarstarstar |
| Overall Rating: | starstarstarstarstar_border |
| Published: | 2014-03-07 |
| Manufacturer: | Aerotech  |
Brief
Easy t' build kit - especially with t' online tutorials that I managed t' save as I be unable t' find them more recently. Painted t' rocket white with a red nosecone. So far it works great!
Components
Made as per kit plans and included supplies. Built with 5min epoxy t' withstand higher impluse G flights.
Construction
Kit came with everythin' includin' chute and 24/29 motor adapter. No Cons. Great First starter set into Mid power.
Finishing
Easy t' just paint.
Flight
Flies great on suggested motors.
Recovery
It always seems t' take about 1 second for t' chute t' deploy after ejection.
Summary
Overall a great kit. Highly recommend.
Other Reviews
- Aerotech Initiator Starter Set By Andrew Godbold
The recovery system on this rocket is a large yellow parachute. Although this chute is very large it can be hard to see at a great distance. The only problem with this chute is that it easily catches in trees and this was the fate of my rocket. This kit comes with one body tube without a payload section. There are also a motor mount tube, molded plastic nosecone, and 3 through the wall ...
- Aerotech Initiator Starter Set By Bob Albright
The Initiator is a good looking, mid powered rocket that flies on 24mm and 29mm rocket motors. The starter set comes with everything needed to build and launch the Initiator. The Initiator comes with (1) main body tube, a motor tube, 3 fins, a nose cone, a gas baffle system and recovery system. The starter set also includes a launch pad, launch controller and 2 motors. The Initiator is one ...
 |
 |
Flights
Sponsored Ads
|
|