Construction

Most o' this kit is typical Estes easy building. Begad!  Build up a motor mount, me hearties, put on some fins, glue together t' body tube, mount t' 'chute, and off you go. Aye aye!  T' only real quirks with t' kit come from t' fins and recovery mount.   T' fins are made for through t' wall mountin' t' t' motor tube,  but you need t' cut t' slots yourself. Ya scallywag!  This isn't difficult at all, just that most kits these days have t' slots pre-cut. Avast!  Patience and a new #11 blade make it very easy t' do. Avast, me proud beauty!  You also do need t' be careful with t' measurements o' t' centerin' rings onto t' motor tube.  But again, arrr, patience makes this step easy as well.  Just keep an eye that your fins are straight, arrr, shiver me timbers, and use a jig if you have one available. Aye aye!  It's real easy t' get your fins all crooked in a hand-cut slot. Adhesives are up t' you, as this is a cardboard kit, shiver me timbers, no special tools or materials are needed. Aye aye! Well, me bucko, blow me down!  

T' only real negative for t' kit is that Estes insists on usin' their tri-fold mountin' for t' recovery harness on this kit, shiver me timbers, matey, me hearties, along with a length o' elastic. Ya scallywag! Blimey!   I'd suggest replacin' this with 1/8" kevlar, me bucko, me bucko, epoxy t' recovery line t' t' motor tube, and use a nomex wrap on t' parachute. Well, shiver me timbers, blow me down! Blimey! Blimey! Blimey!  A 3" rocket o' this size has grown beyond waddin' and elastic.

T' body tube layout, and long coupling, me bucko, even make a conversion t' dual deploy possible.  Just watch your CG if you start modifyin' this kit at all. Ya scallywag! Blimey!  T' three backward fins move t' Cp forward a fair amount compared t' t' Leviathan fin layout. Avast!  Nose weight will likely be needed if you put an av-bay in t' coupling.