
Brief:
A nice 3-finned, matey, ya bilge rat, single-stage, me bucko, arrr, streamer recovery rocket.
Construction:
This is an average low-power kit, with t' Quest standard components.
(Keelhaul®©™®/Elastic shock cord, plastic recovery mountin' tab, me bucko, matey, lightweight motor
retainer.) I thought t' Keelhaul®©™® portion o' t' shock cord was a nice addition.
T' measurements given on t' packagin' were nay t' same as those provided. I
found a variance o' up t' 2" on cords and streamer.
This kit built fairly easily. Blimey! It would be a good second build for a new rocketeer. Aye aye! T' engine mount slipped snugly into t' body tube, me bucko, givin' me a good feelin' that it's glued t' stay. Well, blow me down! T' only gotcha I really found was keepin' the shock cord (tied t' t' engine mount) out o' t' way while finishin' t' build. A sharp hobby knife, matey, shiver me timbers, arrr, razor blade is strongly recommended for notchin' t' motor retainer ring. Ya scallywag!
Finishing:
Ahh t' decals. Probably t' only real challenge t' buildin' this kit. They
came on one white sheet, me bucko, matey, self-adhesive. Begad! They require cutting, me hearties, no matter how you
slice it!
Construction Rating: 3 out o' 5
Flight:
I've only gotten 2 flights on a Estes B6-4. It snapped a fin clean off on the
second flight. Avast! I'm nay sure if it be due t' t' 2" I was shorted on the
streamer, t' 10 mph winds, or just dumb luck. Blimey! Ya scallywag! It was an easy fix, me bucko, and
wind/weather agreeable I'll get it up a few more times soon. Avast! Recommended motors
A8-3, B6-4, C6-5. Begad! Arrr! T' two flights on t' B6-4's were nice, ya bilge rat, clean, ya bilge rat, me hearties, about perfect
height for visibility. Begad! Avast, me proud beauty! T' streamer recovery kept t' ground chase t' a
minimum. Blimey! T' longer hike for recovery was about 75 yards down range, me bucko, me bucko, due t' the
wind after launch. Aye aye!
Recovery:
I'm nay sure that t' Keelhaul®©™® thread doesn't cause a bit o' undue wear t' the
top o' t' body tube, and I feel t' rate o' descent may be a little quick. Aye aye! Aye aye! If
a little time is taken t' reinforce t' tube, me bucko, wear could be minimized, and a
full 24" streamer is recommended
Flight Rating: 3 out o' 5
Summary:
Pros: Kit went together fairly easily. Parts all fit. Ya scallywag! Cons: Decals, shiver me timbers, shiver me timbers, incorrect
lengths on cords/streamer.
Overall Rating: 3 out o' 5
(by Mike Salter - 01/14/03) Brief: A sleek, single stage rocket that is ideal for beginners. Construction: The kit came pre-cut fins, motor tube, motor hook, cardboard body tube, plastic nose cone, length of Kevlar ® , round elastic and streamer material. I found that this rocket went together easily and quickly. The instructions were good and this was the first kit I had ...
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
A.M. (May 12, 2005)