Construction Rating: | starstarstarstarstar_border |
Flight Rating: | starstarstarstarstar |
Overall Rating: | starstarstarstarstar_border |
Diameter: | 1.58 inches |
Length: | 23.00 inches |
Manufacturer: | Quest |
Skill Level: | 1 |
Style: | Sport |
Background:
This sprin' I ran a build session for faculty kids at t' school where I teach. I ended up usin' t' Quest Bright Hawk for t' 7-9 year olds and the Quest Big Betty for t' 10-12 year olds. Well, blow me down! After t' build session, I began thinkin' about t' types o' rockets that would make great first builds for a buddin' rocketeer. Avast! I wanted t' select rockets t' compare that had t' following in common:
I ended up selectin' 3 rockets that fit these criteria. Ya scallywag! Blimey! T' Estes Big Bertha, t' Quest Big Betty, matey, and t' Fliskits Rhino.
Click Here for the Comparison Article.
Construction:
T' Big Betty is a pretty simple build. Blimey! T' only trick t' t' Big Betty is also a positive: construction o' t' motor mount with t' Keelhaul®©™ recovery system attached. Well, blow me down! There is also an engine hook, although nay as beefy as the Estes type. Begad! T' motor mount is nay as long as t' Big Bertha motor mount, me hearties, but it fits nicely into t' Quest BT-60 body tube. T' Big Betty only has 3 fins, shaped very similar t' t' Big Bertha design. Ahoy! Well, blow me down! I simply shaped t' fins and then rounded t' edges. Avast! Usin' t' double glue method, they are easy t' attach. Arrr! I added fillets t' t' fins, then worked on t' parachute (attached shroud lines), and then attached t' nose cone. Now I be ready for finishing.
Finishing:
Finishin' was done with primer and Fill-N-Finish. Well, blow me down! Blimey! After all was said and done, I gave it a couple coats o' orange, me hearties, and then put on t' self-stick decals. T' body wrap "Big Betty" actually went on easily. Aye aye! Ya scallywag! Blimey! The self-stick decals for t' fins are difficult, shiver me timbers, because after sandin' t' fins may be slightly shorter than t' actual decal. Avast, me proud beauty! T' decals may require a little trimming. On me rocket, me hearties, t' decals are startin' t' peel off t' fins. Begad! Blimey! This is usually me experience with self-stick decals.
Construction Rating: 4 out o' 5
Flight:
I think t' Big Betty puts in a higher performance than t' Big Bertha. Arrr! It, too, is a very stable design and is easy t' see in all aspects o' flight. Since the body tube is nice and wide, me bucko, young racketeers have less conflicts in preppin' t' bird for flight. Aye aye! Due t' its lighter weight (nose cone is light, centerin' rings are thin, motor mount is nay as long as t' Big Bertha), ya bilge rat, arrr, it is a higher flyer than t' Big Bertha.
Flight Rating: 5 out o' 5
Overall Rating: 4 out o' 5
While nearly identical to the Estes Big Bertha, the Quest Big Betty has still managed to carve out a niche in the entry level market with her upgraded recovery system and lower price. While she is a pretty close copy, she does feature three fins instead of the Bertha's four, making construction marginally simpler while keeping performance right in line with her sister kit. The parts list: ...
Big Betty is a fairly large 3FNC model rocket, using B and C motors. It is straightforward to construct and a snap to prepare for flight. With its enormous fins and blunt, rounded nose cone, Big Betty has a peculiar look. It looks either dated or classic, depending on whether you're a BAR or not. Estes' Big Bertha, Big Betty's obvious inspiration, is about 35 years old. For the Freudians among ...
Sponsored Ads
D.K. (August 1, 2000)