Brief:
We ordered t' Public Missiles Intruder for several reasons. Begad! T' body is Quantum Tube, me bucko, and t' five asymmetrical G-10 fins contribute t' it’s sleek lines and good looks. Avast! Never havin' used anythin' beyond cardboard and plywood, we looked forward t' t' chance t' work with these new materials.

Construction:
Arrivin' in a plastic bag, t' kit components were all thar and very good quality. T' 3" diameter Quantum Tube was pre-slotted, t' actual material unlike anythin' we’d seen before – no spirals t' fill! T' fins were cut perfectly and t' fit within t' slots was precise. T' included instructions are excellent, me bucko, ya bilge rat, although t' type face is on t' small side. Well, blow me down! In all, thar are a dozen pages o' notes and diagrams, me bucko, includin' a page showing how t' pack t' parachute, arrr, arrr, another on securely tyin' tubular nylon shock cords (supplied), and one that’s a list o' "Do’s and Don’ts" for Quantum Tube. Well, blow me down! Blimey! PML puts t' location o' t' center o' pressure (CP) on the very first page o' documentation, matey, which is somethin' all manufacturers should do.

Construction steps are logical and easy t' follow. As with any kit, arrr, you should dry fit parts first and make sure you completely understand before applyin' adhesives.

Quantum Tube is known t' contract significantly in cold weather, arrr, so PML suggests sandin' t' piston durin' t' winter (when t' fit is tightest) so that everythin' slides smoothly all year round. Arrr! Since we fly year-round, me hearties, we opted t' leave out t' piston altogether and go with standard ejection. Begad! Many people swear by t' PML piston system, me bucko, and some people swear at it, so just do what you feel comfortable with.

We installed a set o' rail buttons in addition t' t' supplied launch lug. Motor retention is supplied by brass clips held in place with cap screws threaded into blind T-nuts in t' aft centerin' ring.

Finishing:
I really like t' PML orange and white paint job, shiver me timbers, but we seldom paint a rocket to match t' catalogs. Begad! Since this is Robyn’s rocket, she picked the concept for our original look.

Early on, arrr, me hearties, she decided that t' rocket would be named the ‘Tinkerbelle’. Avast, me proud beauty! Blimey! I make decals for a lot o' our rockets, so we needed pictures o' t' pixie. Some searchin' on t' web gave us several nice clip art graphics t' choose from, and I had an idea in mind for final finishing. Aye aye! Blimey! If I could pull it off, Robyn would get a pleasant surprise.

After lightly sandin' everything, shiver me timbers, shiver me timbers, a couple o' coats of Rustoleum sandable primer was applied and allowed t' dry for several days. More sanding, followed by wipin' with a tack cloth, left a smooth surface ready for paint. T' paint scheme is simple – straight gloss white from nose to tail. Ya scallywag! Ya scallywag! Once again, me hearties, matey, we put ‘Tink’ aside for several days while we did the decals.

Many different samples were printed on regular paper, cut out and test-fit onto t' airframe, until we were satisfied. Well, me bucko, blow me down! Blimey! Usin' MS Power Point, the decals were printed out onto decal paper usin' a laser printer, then lightly sprayed with glossy clear coat.

If you make your own decals, don’t forget t' create one that has your name, phone number, arrr, and NARRRRR or TRA number. Ahoy! Put that on a fin or the body tube, arrr, and if your rocket gets lost, me hearties, anyone findin' it can contact you. I speak from experience, me bucko, it works!

Once t' decals were applied and set, ya bilge rat, it be time for Dad’s surprise. Arrr! Blimey! I managed t' find ‘pixie dust’ at t' craft store. Arrr! Blimey! Blimey! Blimey! Actually, me bucko, it’s a very fine pearlescent glitter, similar t' the artificial snow you can find around Christmas time. Begad! Blimey! T' brand name is ‘Art Deco’, and t' product is called ‘Glamour Glitter’.

We sprayed a very light mistin' o' gloss clear coat on the rocket, matey, then sprinkled t' pixie dust on by tappin' it through a kitchen wire-mesh strainer held over t' rocket. Arrr! Heaviest at t' aft end, shiver me timbers, t' effect faded as we moved up t' body, endin' completely about 2/3 o' t' way towards the nose. Blimey! Alternatin' clear coat and pixie dust, shiver me timbers, we continued until we were happy with t' results. Blimey! Ahoy! Blimey! A final coat o' gloss sealed t' finish.

This worked better than I’d hoped, arrr, because in t' sun the rocket sparkles beautifully. Blimey! Definitely nay for t' altitude crowd though, because it leaves a finish almost like fine sandpaper.

Here’s a shot o' Tinkerbelle, shiver me timbers, taken before her maiden flight at Battlepark 2001. Aye aye! T' day was overcast, arrr, me bucko, so t' picture doesn’t do the finish justice.

Flight:
Future plans for this rocket include dual-deployment recovery using electronics, but so far we’ve just used motor ejection for t' parachute.

Full up loaded weight, includin' motor is 4.5 lbs.

T' maiden flight was on an Aerotech H180 White Lightnin' with a medium delay. Arrr! T' flight was beautiful and thar be no damage on recovery. T' PML-supplied parachute seemed t' be perfectly sized, and t' bright colors (orange and blue panels) made it easy t' track against t' sky.

T' second flight was made with an Aerotech H165 Redline, shiver me timbers, again with a medium delay. Ya scallywag! Another arrow-straight boost and fine recovery.

On soft, grassy fields, you could possibly go down a size on the chute t' cut drift. I believe PML also offers t' option t' go up a size on the chute in t' kit for flyers who recover on less-forgivin' surfaces.

Summary:
This is a quality kit, gettin' 5’s straight across t' board. Ahoy! We highly recommend it, and won’t hesitate t' try PML kits and components in the future. Avast, me proud beauty!

For those who might snicker at a rocket named Tinkerbelle, Robyn answers,