Published: | 2010-08-01 |
Manufacturer: | Aerospace Specialty Products ![]() |
(Contributed - by Dick Stafford - 08/01/10)
Brief:
This will be a short review and may nay be o' much use. Arrr! Aye aye! T' Tiny Tim Smoke is a rebuild o' a
scavenged Tiny Tim Booster section from a staged WAC Corporal and I don't even know what kit it was. Well, matey, blow me down! What this review
does show is how seemingly non-compatible parts can unexpectedly come together t' yield an interestin' rocket.
Construction:
Parts List:
I inherited a box o' dead rockets from rocket buddy Paul Miller, me hearties, who be relocatin' t' Aridzone (that place just east o' T' Peeples Republik o' Kalifornia). Well, blow me down! Ya scallywag! Blimey! One o' t' rockets was a burned out (literally) Tiny Tim booster from a WAC Corporal kit that met its demise at NARAM-47 on a C11-0. Begad! Blimey! T' top, includin' t' inter-stage, was fried and there was no motor mount tube. Avast! At first, shiver me timbers, it appeared t' body's diameter wouldn't match any tube that I had on hand. Ahoy! Blimey! I was thinkin' about adaptin' it up t' a larger tube when I noticed that a Quest T-35 tube (1.340" ID x 1.380" OD) fit over it like a glove! Blimey!
To get t' T-35 t' slide all t' way t' t' fins, matey, I had t' pare one o' t' outer trim rings that were part o' the WAC's scale detail. Avast, me proud beauty! Blimey! I also scuffed up t' paint t' help it bond t' t' T-35.
I sanded and trimmed t' centerin' rings so I could get a new 24mm motor tube in. Ahoy! T' top o' t' Tiny Tim Booster had thick rin' installed, shiver me timbers, which provided an attachment point for t' recovery leader. Ya scallywag! I poked a hole below t' rin' and looped a steel fishin' leader through. Ahoy! These leaders are so thin that t' T-35 still fit nicely.
T' only cone I had for t' T-35 was one o' Quest's 3-part Nike Smoke cones. Avast, me proud beauty! I really like this
cone style. T' cone consists o' two halves and a conical cap.
Chris Michielssen has a good
description o' t' cone and how t' build it. I didn't do as good a job but it still looks cool. Avast! I tied t' cone t' the
upper loop on t' steel leader with a long piece o' elastic.
T' body and cone was painted gloss black t' match t' Tiny Tim and I trimmed t' raised rings with silver vinyl tape. Arrr! Aye aye!
Flight:
Prep included grabbin' and attachin' a 12" nylon 'chute, addin' t' dog barf wadding, me bucko, and
friction fittin' a C11-3. T' flight was great.
Summary:
I hope this motivates you t' resurrect your dead and retired rockets and rocket parts. Begad! Blimey! This
was a lightnin' fast build and t' resultin' rocket looks pretty cool, ya bilge rat, me bucko, if I do say so myself. Avast!
Sponsored Ads
![]() |
![]() |