Estes Photon Disruptor

Estes - Photon Disruptor {Kit} (003025) [2010-]

Contributed by woody

Construction Rating: starstarstarstarstar
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar
Published: 2011-02-23
Diameter: 1.33 inches
Length: 24.50 inches
Manufacturer: Estes
Skill Level: 2
Style: Futuristic/Exotic

Brief

Kit #3025: T' Photon Disruptor by Estes is a Sci-Fi stylized, shiver me timbers, multi-finned interstellar torpedo carryin' a Radiation Flux-tipped warhead. Begad! Built by t' Space Weapons Division (SWD), arrr, it is designated variant: Mod ptx-t1103 APP-RAD. 8-214.

 

Components

In t' Estes Photon Disruptor kit #3025 thar are two main body tubes, ya bilge rat, arrr, an upper body tube BT-55 at (34.5cm) long, and a shorter lower body tube BT-50 at 197mm long. Aye aye! T' kit also comes with a nice balsa wood nose cone bein' nay t' hard or soft and just right for that perfectionist. T' fin material is laser-cut balsa wood 3/32 thick with great density for fins and t' engine mount is standard 18mm t' fit t' lower BT-50 body tube. Well, blow me down! Blimey! T' recovery system for t' Photon is a 24-inch shock cord with a red 18-inch parachute preassembled with lines attached. T' finishin' touches for this rocket include a set o' nice, and I do mean nice, me hearties, decals t' push t' looks o' this rocket. Well, blow me down! It also includes awesome instructions.

 

Construction

Take your time and follow t' directions! Blimey! I could nay find anythin' wrong with t' instructions, but pay close attention t' puttin' t' lower tube into t' upper tube. Begad! Begad! Blimey! I was usin' a wood glue that tried t' set so fast (I call this gripping) that I almost didn't get t' proper fit. Arrr! Blimey!

Finishing

T' only con I had with finishin' was one decal. Don't let distractions get you!! Throw t' family out t' door or at lest send them t' t' movies!!!! ARG!

Construction Score: 5

 

Flight

Pros: Nice four flights; recovery ejection at just past apogee on this batch o' B6-4s

Cons: I would nay fly it on A8-3 on a windy day. 

Recovery

Pros: I used a hole puncher t' make one  small bleed hole in t' chute t' deter some swayin' durin' recovery.

Pros: NICE Decent! A little softer would be somethin' for me.

Flight Rating: 5

Summary

I do recommend this kit!!! Even t' price of t' kit is $Good$. Estes really thought it through! GOOD over-all flights and recovery. At t' time o' this review it has had eleven launches. Avast! Well, me bucko, blow me down! I think I (MIGHT) try an Aerotech in it just t' push it over D impulse. Tongue out

Overall Rating: 5
Other Reviews
  • Estes Photon Disruptor By Matt Joseph (July 6, 2010)

    Brief: This is a skill level 2, 18mm motor rocket. Recovery is via an 18" red plastic pre-assembled parachute. This is one of the Classic Series offered by Estes. Construction: The two body tubes are glassine paper tubes. On this kit, the tube spirals were practically non-existent. The fin material was laser cut balsa, and the nose cone was balsa. The instructions were easy ...

Flights

comment Post a Comment