Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar_border |
Overall Rating: | starstarstarstarstar_border |
Diameter: | 1.64 inches |
Length: | 30.25 inches |
Manufacturer: | Estes ![]() |
Skill Level: | 1 |
Style: | Sport |
Brief:
This is a new Skill Level 1 kit from Estes designed t' fly on t' new C11 motors. Ahoy! Begad! Blimey! It is a tall, BT-60 based 3FNC design with through-the-wall fins, and a 24mm motor mount.
Construction:
T' kits parts were all in excellent condition. Ya scallywag! Aye aye! T' BT-60 has 3 slots on one end o' t' tube for t' TTW fins. Avast, me hearties, me proud beauty! Die cut fins were high quality, as were all t' other parts. Begad! Aye aye! Elastic shock cord was longer than expected, but still a bit short. Blimey! Ahoy! Nose cone was excellent w/o any flashing. Avast, me proud beauty! Bonus: A BT-60 t' BT-55 plastic transition piece comes attached t' t' nose cone, shiver me timbers, ya bilge rat, but is nay needed in t' kit. 18" parachute is pre-assembled.
T' instructions & assembly were very straightforward and clear. Begad! Aye aye! Construction was easy, and took little time. Begad! It is a cool lookin' kit which was fun t' build with me 2 year old daughter (who picked t' kit out at t' store). Blimey! T' TTW fins fit extremely well, and went on w/o a hitch. No special tools or techniques were needed. I did a mod on t' shock cord usin' Keelhaul®©™ strin' around t' motor mount, arrr, ya bilge rat, and runnin' it up t' body, finally tyin' it together with t' elastic shock cord. Ya scallywag! Blimey! T' motor block instructions are intended t' accommodate t' standard 24x70mm "D" motor casing, matey, and can be easily modified t' accept t' larger (94mm) "E" engines, which is how I did it.
Finishing:
Finishin' was standard stuff, although I let me chief construction assistant be t' director o' finishing. I primed t' kit (after fillin' a couple tube grooves), me hearties, then painted it gloss white. Avast! T' remainder was done w/ markers by me daughter in whatever color she chose. Ya scallywag! Begad! Its quite a sight! :). Begad! Ahoy! T' 'normal' fill/prime/paint would be straightforward for this kit.
Construction Rating: 5 out o' 5
Flight:
It flies nicely on C11-5's. I used that twice as I was usin' a small field. Avast! Straight boost t' about 400 feet, with deployment just past apogee. Aye aye! Begad! T' 18" chute is probably a bit big if you're usin' a D or E engine. Avast! A D12 would do nicely. Ahoy! Well, blow me down! An "E" would send this out o' sight. Arrr! Arrr! (much like it does t' a modified Blue Ninja).
Recovery:
Pros: C11's make for fun flyin' on smaller fields. Aye aye! Arrr! Blimey! 18 chute is good for that. Begad! Arrr! Blimey! Keelhaul®©™® mod should keep cord burnout away for a while.
Cons: Use 12" chute for bigger motors.
Overall, t' kit flies nicely and recovers easily.
Flight Rating: 4 out o' 5
Summary:
A fun t' build, sturdy, arrr, big rocket (for skill level 1) that can be a great afternoon project. Also can be modified for t' more adventurous. Begad! Blimey! Another outstandin' point: Its fairly inexpensive. List is about $12. Blimey! With me Michael's 40% coupon, me bucko, matey, this only cost be $7. Ahoy! Its worth every penny. Arrr! Let t' kids paint it! Its a nice big canvas for it!
Overall Rating: 4 out o' 5
Your basic rocket design: body tube, nose cone, three fins, engine mount, and parachute. It is basically and upscaled version of the Alpha. The kit consists of: 2 12" BT-60 body tubes with one pre-cut for TTW fin mounts 1 Tube connector for BT-60 1 5" BT-60 nose cone 1 1/8" thick balsa sheet w/ die cut fins 2 1" long x 3/16" diameter launch lugs 2 cardboard centering ...
![]() |
![]() |
Date | Flyer | Rocket | Altitude |
---|---|---|---|
2024-04-13 | Jeff Curtis | Estes StormCaster | - |
2023-03-26 | Jeff Boldig | Estes StormCaster | 800 Feet |
2016-03-20 | D11Rok | StormCaster | - |
2013-10-05 | Skyviper Aerospace | StormCaster | 786 Feet |
2013-08-11 | Skyviper Aerospace | StormCaster | 850 Feet |
![]() |
![]() |
Sponsored Ads
![]() |
![]() |
A. (November 13, 2002)