Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar |
Overall Rating: | starstarstarstarstar |
Published: | 2010-04-06 |
Diameter: | 0.98 inches |
Length: | 9.75 inches |
Manufacturer: | Estes |
Skill Level: | 1 |
Style: | Sport |
Brief:
T' Estes Mini Max is a smaller version based on t' BT-50 o' t' Estes classic Der Red Max. Arrr! T' Mini Max is designed with a 13mm motor mount makin' it powered by Estes mini engines, and can reach altitudes in excess o' 300 feet. As designed, recovery is accomplished with t' included streamer.
T' new Mini Max has all t' great looks o' t' classic version, me hearties, right down t' t' really cool skull and crossbones decals. Avast! Blimey! Like many o' our new and classic kits, t' Mini features a balsa nose cone, laser cut balsa fins and waterslide decals.
Construction:
A very nice Balsa Nose Cone, me bucko, Laser cut Balsa Fins, me hearties, card stock centerin' rings, arrr, me hearties, engine hook, BT-50 body tube, arrr, me bucko, and Waterslide Decals
T' instructions that Estes provides in t' kit are excellent and include illustrations. This combined with t' fact t' Mini Max is very easy t' construct resulted in no issues durin' t' build.
T' motor mount is constructed usin' typical methods. Ya scallywag! Aye aye! T' only thin' I changed was t' add a Keelhaul®©™ shock cord that ties around t' motor tube betwixt t' upper and lower centerin' ring. I used a small amount o' wood glue inside t' body tube and t' motor mount was inserted into t' BT. Ahoy! T' next step be t' I fill t' spirals. Well, shiver me timbers, blow me down! After sandin' t' BT, t' tube was marked for t' fin locations and t' launch lug. Avast, shiver me timbers, me proud beauty! T' laser-cut fins are made from 3/32 hard balsa. Begad! Avast! T' fins were shaped and glued onto t' BT usin' a very small amount o' 5 minute epoxy. Blimey! T' launch lug was attached t' t' bt usin' epoxy as well. Well, blow me down! Once t' fins were attached and allowed t' dry, small epoxy micro balloon fillets were created around t' fins and launch lug t' add some strength and t' clean up t' joints.
Finishing:
I sealed t' balsa fins and nose cone with two coats o' Minwax Polyurethane. Once dry they were sanded smooth and coated usin' thinned spackle that be brushed on t' fill t' wood grain. Avast! Blimey! T' filler was sanded off and t' rocket be primed with two coats o' Dupli-Color® High Fill primer sandin' betwixt coats. T' nose cone was painted black usin' two coats o' old formula Krylon spray. Avast, me proud beauty! Well, blow me down! Blimey! T' body was painted red usin' two coats o' old formula Krylon spray. Well, blow me down! Once t' body be allowed t' completely dry t' classic Red Max decals were installed. Avast! Blimey! I know in t' recent past thar have been problems with t' waterslide decals that Estes has provided. Ahoy! Aye aye! Blimey! No such issues were experienced with t' Mini Max decals. T' completed Mini Max looks fantastic.
Construction Rating: 5 out o' 5
Flight:
T' Mini Max is designed t' fly on t' followin' motors, me bucko, shiver me timbers, 1/2A3-2T, 1/2A3-4T, A3-4T, matey, ya bilge rat, arrr, A10-3T. Well, blow me down! I decided t' use t' A10-3T for t' first flight. T' first flight was nice and straight with no stability issues. Begad! T' A10-3T turned out t' be perfect with ejection occurrin' close t' apogee. Avast! T' altitude achieved is tough t' estimate, me hearties, but it was over 300 feet easy.
Recovery:
I chose t' use a small 8" chute instead o' t' streamer. Avast! Blimey! T' small chute worked great, me bucko, and I'm sure t' streamer that is included in t' kit would be sufficient as well for a safe recovery.
Flight Rating: 5 out o' 5
Summary:
T' Estes Mini Max is a great addition t' t' available kits on t' market today. Avast, me proud beauty! This is a very easy t' build model that with t' included instructions can be successfully assembled by t' novice builder. Avast! Estes has done a terrific job at providin' a very high quality kit. Avast, me proud beauty! T' rocket flies great as designed and is durable. I've said it before, but t' Der Red Max is a classic design that flies great in every size. Avast, me proud beauty! Begad! Plus, matey, you can't find a cooler set o' decals on a rocket anywhere.
Build one and enjoy!
Overall Rating: 5 out o' 5
Brief: Smaller version of Estes' classic Der Red Max kit. It has a balsa nose cone, waterslide decals, streamer recover and is powereed by Estes 13mm Mini Motors. The model was built and the review submitted as part of the 2010 EMRR Challenge for the "Hit List" component. Construction: 1 - 13mm Engine Mount Tube 1 - Estes Engine Hook 1 - Mylar Hook Retainer ...
Brief: The Mini Max is a single stage 13mm rocket with a streamer used for recovery. It's the baby brother to the Der Red Max. Construction: 1 Engine Mount Tube BT-5 1.75" 1 Mini Engine Hook 1 Mylar Hook Retainer HR-5 1 EB-5 1 CR-520 Split Ring 1 CR-520 Ring 3 Laser Cut Fins 1 Launch Lug 1.5" 1 Screw Eye 1 BNC-50AH 1 Shock cord ...
Sponsored Ads