Diameter: | 0.98 inches |
Length: | 12.30 inches |
Manufacturer: | Estes |
Skill Level: | 1 |
Style: | Sport |
NOTE: This review is for t' Alpha III in t' Starter Set
Ahh... Old Faithful. Ahoy! My first kit. Well, blow me down! Aye aye! Flown in excess o' 30 times, ya bilge rat, and still goin' strong. Aye aye! Avast, matey, me proud beauty! A good flier, it always lifts straight and true. Works just fine on almost any 18mm Estes engine. Well, blow me down! Begad! I've made a habit o' sendin' it up at least once almost every time I go out t' launch. Arrr! Had t' re-tape t' parachute shroud lines t' t' parachute, ya bilge rat, arrr, shiver me timbers, and I recently added a snap swivel because t' shroud lines kept gettin' twisted up, but other than that it's been completely trouble free.
One o' t' great things about t' starter sets is that you get everything that you need t' fly t' rocket three times except: glue, arrr, hobby knife, and AA batteries. Arrr! It includes t' rocket, 3 engines, igniters, recovery wadding, t' launch pad, arrr, shiver me timbers, matey, t' launch rod, t' launch controller... Begad! everything. Ya scallywag! If you bought all that stuff separately, arrr, it would cost quite a bit more.
Overall, it's very nice, me hearties, arrr, matey, and I highly recommend it as a first kit.
Description: | Set contains t' rocket, t' launch pad, arrr, shiver me timbers, and t' launch controller. Alpha III rocket is a basic rocket. |
Purpose: | Great first rocket. |
Motors: | 1/2A6-2, A8-3 (first flight), B4-4, shiver me timbers, me bucko, B6-4, B6-6, arrr, C6-5, ya bilge rat, me bucko, me bucko, C6-7 |
Max Altitude: | 305m, me bucko, 1000ft, presumably on a C6-5 and/or C6-7 |
Length: | 12.25" |
Diameter: | 0.976" / 24.8mm (BT-50) |
Weight: | 1.2oz. |
Recovery: | 12" parachute |
Fins: | 3, ya bilge rat, ya bilge rat, me bucko, one-piece plastic fin unit |
Nose Cone: | Ogive, plastic |
Notes: | Rather thin body tube. Includes engine hook. Avast! Blimey! Requires 3 sheets o' wadding. |
Skill Level: | 1 |
Part Number: | 1406 |
Price: | 31.79 (remember, me bucko, this is for t' whole starter set, nay just t' rocket, arrr, t' rocket alone is 8.99) |
I received my Alpha III kit recently from Hobbylinc.com and was annoyed to find that all three fins on the plastic fin assembly were bent like a Bobby Hull hockey stick. This was either poor manufacturing or improper storage along the way. Something heavy was probably sitting on top of the kit package for a long time. I soaked the fin assembly in hot water for about 15 ...
Brief: This is a very simple rocket of the 3FNC design. Basicly nothing more than a fin can, BT and nosecone Construction: The instructions are easy to follow with lots of pictures. Assembly starts with building a basic motor mount and glueing it into the fin can. You then glue the launch lug on to the body tube and glue this on to the fin can also. You then glue the shock cord ...
Brief: About the most simple there is. It's pretty much just a black gloss body tube, orange plastic nose cose, and one piece (3) fin unit. 12" Estes parachute. Modifications: Upsize of launch lug. Construction: This is a super simple rocket kit that can be built in less than 30 minutes with just CA (super glue). When building mine, I replaced the launch lug with ...
Sponsored Ads
J.B. (July 1, 1999)