Brief:
This be t' latest offerin' from Dr. Begad! Aye aye! Zooch, a semi-scale version o' t' manned Russian spacecraft, Soyuz. Well, blow me down! Ahoy! It is powered by a single 18mm motor and comes down with parachute recovery. Well, blow me down! This model does require some patience and skill--it is nay a beginner's kit. Well, blow me down! I'd rate this at a 3-4 skill level.

Construction:
All parts included in t' kit are good quality and include:

• 1 T-20 core tube
• 1 T-50 tube
• 2 centerin' rings
• 1 pre-ballasted balsa spacecraft adapter
• 1 balsa nose cone
• 1 SAS kit bag(includes dowel, ya bilge rat, matey, small tube, and wooden nozzles)
• 1 screw eye
• 1 engine hook
• 1 launch lug
• 1 CR205W engine block ring
• 1 snap swivel
• 2 thin dowel stock
• 1 sheet balsa stock
• 1 larger dowel (to aid with rollin' booster tanks)
• 1 cardstock wrap sheets and templates
• 1 small piece o' Keelhaul®©™
• 1 length o' recovery elastic
• 1 plastic chute

I be asked by Dr. Well, me bucko, blow me down! Zooch t' do a beta build o' t' kit. Begad! Arrr! I hit several snags on t' initial build, matey, mostly some measurement discrepancies in t' instructions and some proof readin' suggestions. Begad! Blimey! He and I hammered those out betwixt emails. Blimey! And now, shiver me timbers, I trust, that things will go smoothly for anyone attemptin' this kit. Well, blow me down! That's t' point o' beta testing...to iron out t' kinks, ya bilge rat, ya bilge rat, right?

Some paper modelin' skills are a good thin' t' have for this build. Ya scallywag! T' booster tanks need t' be rolled and glued, shiver me timbers, all four o' them. Well, blow me down! T' kit will provide a dowel t' aid in this process. Aye aye! I started usin' t' dowel but ended up usin' a spare BT-20 I had layin' around when it was all said and done. Avast! I ended up havin' less wrinkles in t' paper usin' t' BT.

You'll need a razor saw for this build. Well, blow me down! There is a balsa spacecraft adapter that needs t' be measured and cut into 3 pieces. Arrr! 2 pieces get used as bulkheads and t' largest piece is part o' t' SAS spacecraft. It's easy job with t' right tool.

T' interstage is made by cuttin' dowels t' length and trimming. Begad! Blimey! A clever sleeve is provided t' help with alignment. Be careful here so as nay t' glue t' dowels t' t' alignment sleeve.

Some neat little wooden nozzle thingies are provided for t' SAS tower. Arrr! Use some tweezers and don't drink any coffee before hand as you'll need a steady hand for placement.

You'll need t' cut some balsa circle plugs for t' bottom o' t' booster tanks. Avast! I cheated and used some sticker paper adhered t' one side o' t' provided balsa sheet. Avast, me proud beauty! Begad! Blimey! This made it so I didn't have t' fill t' wood. Ahoy! Blimey! It also helps keep a clean edge on t' balsa while it's bein' cut. Avast! Blimey! I also used me Hobbico circle cutter t' make t' cuts and it worked like a dream.

There are 16 (tiny) engine bells that need t' be cut and formed from t' provide cardstock patterns. Begad! This is time consumin' but nay difficult. Begad! I suggest usin' tweezers t' hold and clamp t' engine shrouds for several seconds while t' glue sets assumin' you're usin' white glue.

Because this was a beta, one o' t' snags I ran into was regardin' t' templates for t' stabilizin' "flaps" on t' spacecraft. Well, me bucko, blow me down! They were were accidentally left off t' template sheet. Avast, me proud beauty! I fabricated some from matte board, which in hindsight, I made too large for t' size o' t' model.

Finishing:
Finishin' takes a little time dependin' on how much scale detail you want t' add. Avast! I used three different spray can colors on mine. Begad! T' main booster section was sprayed t' Testor's Euro Grey. Begad! I be very pleased with t' way that color looked on t' model, ya bilge rat, a very convincin' and accurate color for this. Begad! T' upper section and space craft be masked and sprayed with Krylon Gloss White and Testor's Competition Orange. Aye aye! Aye aye! Engine bells were hand painted with Testor's Silver on t' outside and Testor's Copper on t' inside.

T' paint scheme is really makes this thin' come t' life. Aye aye! Blimey! I would have enjoyed seein' some decals for t' spacecraft, shiver me timbers, but on this small o' scale they are hardly missed.

Construction Rating: 4 out o' 5

Flight:
Dr. Arrr! Zooch recommends a B6-4 or C6-5 for this model. He generally makes sarcastic remarks about usin' A motors in most his kit instructions, arrr, statin' that, arrr, "A's are for wimps". Avast, me proud beauty! Blimey! It's t' typical humor you'll see from him. With some o' his kits, thar be more truth than humor t' that, me hearties, me bucko, me hearties, but this one could probably handle an A8-3 for a small field, I presume since it only weighs 2.2oz. Blimey! I haven't tried it and hasn't been "officially" recommended so do so with t' appropriate precaution.

I chose a B6 for t' first and second flights. Avast! Begad! I think it's t' best choice for this on small t' medium sized fields, reachin' heights t' about 500ft or so. Begad! T' 4 second delay is just about right too. Avast! Ya scallywag! First recovery attempt wasn't good, but t' flight profile was fine. Begad! Due t' t' cold, ya bilge rat, t' chute stuck together and never opened. I knew I should have dusted t' chute with talc, but I didn't out o' laziness. T' rocket "tumble" recovered and suffered no damage at all.

T' second flight was much better. Aye aye! Dusted t' chute this time, ya bilge rat, and t' flight was perfect. Blimey! My wife even managed t' get a shot o' it while it be snowing, ya bilge rat, which provided some extra some extra scale realism!

Recovery:
T' screw eye pulled itself from t' balsa adapter on a subsequent flight and came down in two separate pieces. Only very minor damage t' one o' t' fins. Ya scallywag! It's since been repaired and ready for flight. Well, blow me down! I did use some CA t' secure t' screw eye on t' initial build but maybe nay enough. Aye aye! I used a couple drops o' epoxy t' secure and repair it now, and I don't think t' screw eye is goin' anywhere.

Packin' t' chute and shock cord is a real challenge. Blimey! There isn't much room for t' recovery components, ya bilge rat, however, me hearties, with some careful plannin' and patience it can be done.

T' kit comes with a dowel t' aid with rollin' t' booster tanks. Avast, me proud beauty! Save t' dowel and put it in your flight box! It comes in handy when time t' pack t' Soyuz. Avast, me proud beauty! T' dowel will help you push waddin' down into t' core tube and feed t' shock cord into t' core tube as well. Avast! Blimey! This should leave you just enough room for t' chute in t' larger, me hearties, remainin' section o' tube. Begad! Dust t' chute and roll it tightly so it will fit. It will fit but just takes a little extra care is all.

Flight Rating: 4 out o' 5

Summary:
PROs: Scale model. Quality parts. Avast! Blimey! Nice flight profile.

CONs: Difficult flight prep.

Overall Rating: 4 out o' 5