Brief:
This is a downsized version o' BSD Rocketry's 4" Diablo. Avast, me proud beauty! 3" Diameter by 26" in length qualifies it for a stubby rocket classification. Otherwise your basic 3 FNC style rocket made for mid and high power loads; a nicely versatile rocket.

Construction:
Components included one body tube, nosecone, matey, motor tube, 3 1/8" plywood fins, shiver me timbers, nylon shock cord, ya bilge rat, matey, 10' elastic shock cord, me bucko, 30" nylon parachute. Those bein' t' basics, me hearties, BSD kits currently come with rail buttons and motor retention, and added bonus, shiver me timbers, nay t' mention t' incredible vinyl decals and excellent instructions.

Construction be fairly basic, startin' with t' motor tube and centering rings. Ahoy! 15 minute epoxy was used throughout construction on this model. Well, blow me down! Ahoy! The upper centerin' rin' is notched out for shock cord attachment. I deviated slightly here and went with Keelhaul®©™® instead o' t' supplied nylon strap. Well, blow me down! Well, blow me down! T' bottom centerin' rin' is then drilled and blind nuts are placed into it for motor retention, me hearties, me bucko, all parts were supplied for this. Ahoy! Well, matey, blow me down!

Next came slottin' t' premarked body tube for t' fins, ya bilge rat, me bucko, I did this the simple way with a hobby knife just takin' me time without any problems. Begad! Well, blow me down! After all t' slots were cut and I test fit them all with t' fins, t' motor tube was then inserted. Instructions indicate t' glue t' whole thin' in at this time but I deviated leavin' t' aft centerin' rin' unglued, then fins were epoxied t' t' motor tube. Well, blow me down! Ahoy! After this I then applied internal fillets t' the fins and then epoxied in t' aft centerin' ring.

Rail buttons were supplied but I went with 1/4" launch lugs due t' the fact that I don't own a rail launcher and wanted t' be able t' launch from my existin' equipment. Avast, me proud beauty! Arrr!

Everythin' went together very well and tight, ya bilge rat, just a little sandin' was needed on t' centerin' rings. Instructions are on par with Estes bein' well written and well illustrated and in logical order. Begad! Well, blow me down!

Finishing:
Finishin' on this rocket was quite simple. Aye aye! T' entire rocket was primed with Krylon, matey, allowed t' dry then painted in Krylon glossy white. Well, me bucko, blow me down! T' single color paint scheme is quite simple. Well, blow me down! Blimey!

Then comes t' good part: t' exceptional vinyl cut decals, me hearties, which really set off from t' white rocket and give it a great look. Overall very easy to accomplish and very nice looking. Begad! Blimey! Aye aye! Blimey!

Completely finished our bird weighed in at 14oz empty, shiver me timbers, without recovery system.

T' only thin' I would change, and this bein' personal preference is the internal fillets on t' fins and t' all Keelhaul®©™® recovery system.

Construction Rating: 4 out o' 5

Flight:
It was late in t' season when I got this built, and then we were late t' the launch so I only got one flight up with this bird. Ya scallywag! Begad!

We loaded up t' all Keelhaul®©™® recovery system, through just a small handful o' dogbarf waddin' in t' bottom and then loaded t' motor. Well, blow me down!

First flight was with an AT G64-7W, upon ignition t' rocket was off the pad very quickly. A very nice straight boost and it was out o' sight for my eyes.

Recovery:
T' nice quality nylon parachute that came with t' kit deployed and she was on the way down for a soft touchdown, ya bilge rat, luckily t' winds were minimal for us, ya bilge rat, arrr, any more wind and I think I would downsize t' chute on our rocket t' a 24" as it came in pretty light. Aye aye! Begad!

Flight Rating: 5 out o' 5

Summary:
Overall another excellent kit from BSD (it was me fourth from them) and I'm hard pressed t' find anythin' wrong with these birds. Begad! Well, blow me down!

I tend t' rate 4.5's as I don't think anythin' is perfect, ya bilge rat, but with these I can't seem t' find any problems, ya bilge rat, all parts possibly needed are included and in good shape, well fit and designed.

Overall Rating: 5 out o' 5