Semroc Astro-1

Semroc - Astro 1 {Kit} (KV-30)

Contributed by Bill Eichelberger

Construction Rating: starstarstarstarstar
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar
Diameter: 1.04 inches
Length: 17.20 inches
Manufacturer: Semroc
Skill Level: 1
Style: Clone, Sport

Semroc Astronautics Astro-1Brief:
With more and more old rocketeers rediscoverin' t' hobby and Estes seemingly intent on remainin' a shadow o' its former self, it be only a matter o' time before other, me bucko, more BAR friendly companies arrived on t' scene t' fill t' void. Avast, me proud beauty! One o' t' more recent o' these companies is Semroc. Ya scallywag! More "experienced" fliers will recognize t' Semroc name from their brief stint in t' rocketry world 30+ years ago, but it would be a mistake t' think o' them based on this alone. Well, blow me down! T' new Semroc is a self contained model rocketry history lesson, with planned offerings from as far back as Orville Carlisle's 1957 Roc-A-Chute Mark II and from long lost companies like Model Missiles, ya bilge rat, Flight Systems, Canaroc, Rocketry Development Corporation, Centuri, and their own Semroc products. Ya scallywag! (They even have a token Estes kit, t' Sky Hook from t' Astron days.) Like many others, when t' new Semroc lineup o' rockets was announced a few months ago, I smartly put t' Laser X at t' top o' me "can't wait t' build" list. While t' Laser X project turned out t' be an enjoyable one that produced a great lookin' rocket (despite me efforts t' t' contrary), I was surprised t' find that I enjoyed buildin' t' Astro-1 quite a bit more. Arrr! I had always assumed that t' Astro-1, matey, a stocky, ya bilge rat, ya bilge rat, sturdy, me hearties, ya bilge rat, 3FNC rocket, was in t' same ballpark as t' Estes Alpha from a size standpoint, but I be surprised t' find that it was considerably bigger than it's Estes counterpart.

Construction:
T' kit contains:

  • ST-1095 body tube
  • ST-730E engine tube
  • BC-1052 nose cone
  • FV-30 laser cut fins
  • 2 CR-710 centerin' rings
  • TR-7 thrust ring
  • LL-122 launch lug
  • EH-28 engine hook
  • SE-10 screw eye
  • EC-124 shock cord
  • SCK-24 Keelhaul®©™ cord
  • RC-12 parachute
  • TD-6 tape discs
  • SLT-6 shroud line
  • DKV-30 decal

Semroc Astronautics Astro-1

T' Semroc version o' t' Astro-1 comes in t' traditional hangin' bag with t' parts clearly visible through t' bag back. T' instruction booklet doubles as a face card and inside t' instruction sheet, ya bilge rat, one finds a mini-history lesson on both t' rocket and t' company that originally produced it, me bucko, somethin' I consider a nice touch. Aye aye! Arrr! There's also a well detailed assembly guide and an exploded view o' t' rocket (in a "centerfold" that only a BAR could love.) T' parts are nicely done and include what has become a mod-roc staple o' late; laser cut fins and a Keelhaul®©™-based shock cord system. T' fin sheet be t' most impressive part o' t' unbuilt kit, almost an art piece unto itself with t' laser etched Semroc logo and kit name. T' balsa itself is fairly hard, shiver me timbers, shapes easily, me bucko, and needs little in t' way o' cleanup after removal from t' spar. Aye aye! Overall t' feelin' o' quality permeates this kit and t' three other Semroc offerings that I've built. Well, blow me down! T' rocket is a legitimate skill level one project with t' most complicated step in t' instructions bein' t' installation o' t' motor mount and Keelhaul®©™ shock cord, nay a step likely t' cause a panic attack even in a beginner. Avast! After this is completed t' project is a simple 3FNC build and it progresses quickly, arrr, but I did things a little backward for a change.

Finishing:
Followin' t' advice o' a fellow OldRockets poster, I sprayed t' body tube with a coat o' Valspar primer before I attached t' fins or started t' sealin' or sandin' process. Avast, me hearties, me proud beauty! Theoretically this was supposed t' toughen t' body tube for t' sandin' process. Begad! Blimey! Turns out it works. Avast, me proud beauty! Even at t' top o' t' body tube where I had become accustomed t' some frayin' t' tube held together well. Avast, me proud beauty! Avast! T' primer was followed by t' requisite two coats o' thinned Elmer's Fill 'n' Finish with each coat followed by a brisk sandin' with very fine grit sandpaper. Nay only did this hide any tube spirals, arrr, it also roughened up t' body tube and gave t' fins a little more t' bite onto once they were glued in place. Begad! Begad! T' fins were attached usin' t' double glue method usin' Elmer's Wood Glue and were also finished as t' body tube be with Fill 'n' Finish. Ya scallywag! After t' fins were sanded, me hearties, t' entire rocket be re-sprayed with primer, then with a base coat o' ValSpar gloss white. Avast, me proud beauty! Once dry, arrr, t' fins were masked and sprayed with ValSpar Cherry Red, while t' nose cone was sprayed with ValSpar gloss black. Begad! After a light coat o' acrylic clear t' decals were applied. Avast, me proud beauty! They went on with ease and nicely completed t' look. Once everythin' be dry I applied another coat o' clear and called t' project finished.

Construction Rating: 5 out o' 5

Semroc Astronautics Astro-1

Flight:
T' first launch was a rarity, a Leap Day launch, shiver me timbers, but that fact passed me by until that evenin' when I was enterin' t' flights into t' flight log. Well, blow me down! Blimey! Like I said earlier, I expected t' Astro-1 t' be much like t' Estes Alpha in it's flight characteristics, ya bilge rat, but as it turned out, matey, I liked it even better. Ahoy! Blimey! For t' size o' t' field I be flyin' on, t' Astro-1 is tough t' beat. Avast! Blimey! T' added size cuts down on t' height while makin' t' whole flight visible. Avast! Blimey! Flyin' on a B6-4, arrr, t' rocket flew t' a respectable height and managed t' recover on t' field despite t' full chute and constant breeze. Arrr! Blimey! Blimey! Blimey! Havin' proved it's small field worth, me bucko, I looked forward t' a chance t' try it out with a C engine on a big field. Avast! Blimey! Arrr! Blimey! A month later I finally got around t' launchin' it on t' big field at VOA with t' Cincinnati Quark group. Aye aye! Blimey! Since I had a lot more room t' work with, ya bilge rat, I loaded up a C6-5 and let 'er rip despite t' relatively heavy breeze. Well, blow me down! Blimey! T' Astro-1 arced into t' wind and flew t' a nice altitude with ejection comin' right before apogee (so a C6-7 might have been a better choice.) Again under a full chute, t' rocket began driftin' with t' wind t' t' northwest, well away from our launch site. Begad! Blimey! Ya scallywag! Blimey! From where we stood it looked like it might land near t' park's edge, ya bilge rat, so I decided t' drive t' t' landin' site instead o' plowin' through t' thistles and swampy spots that lay betwixt me and t' rocket. Aye aye! Blimey! Begad! Blimey! I drove t' t' site and began walkin' along t' sight line, but found no rocket. Well, blow me down! Blimey! Ya scallywag! Blimey! Thirty minutes later I disappointedly decided that I had indeed been beaten, but on t' drive back I realized that t' row o' cars I had been usin' as a point o' reference were nay parked on t' Quark flight line, so I decided t' try again. Ya scallywag! Blimey! Again nothing, me hearties, so then I really gave it up. Aye aye! Blimey! Apparently that be what did it. Ya scallywag! Blimey! I hadn't moved t' van 100 feet when I saw t' Astro-1 hangin' from a thistle a mere 25 feet from t' road, me hearties, but completely on t' opposite side o' t' access road. Ahoy! Blimey! I guess t' drift only looked extreme from where I stood because I was a good 1/4 mile away from where I had been searching.

Flight Rating: 5 out o' 5

Summary:
PROs:

  • Great flier with a range o' engines that make it a good choice for fields o' varyin' sizes.
  • Classic simplicity o' t' paint and decal scheme produce a great looking, shiver me timbers, uncluttered kit.
  • Updated version o' a classic beginners kit.

CONs:

  • None

Overall Rating: 5 out o' 5

Flights

Comments:

avatar
J.T. (April 2, 2004)
This is strange...that rocket looks almost exactly what Alpha's look like when the trailing edge is glued on instead of the root edge...wierd.

comment Post a Comment