Brief:
This is Semroc's rendition o' t' BT-60 baffle.

Construction:
This kit includes three components and a piece o' Keelhaul®©™ twine. Aye aye! Arrr! All three parts are laser cut from a small sheet o' fiberboard.

T' precision o' t' cuts are amazin' with both small features and some cuts that are merely scored. You'd never be able t' cut this with your trusty #11. Avast! Assembly is trivial. Begad! You fold over t' center section into a faceted cone and then attach t' top and bottom plates. Begad! Well, ya bilge rat, blow me down! Make sure you pop out all t' vents. Ya scallywag! T' Keelhaul®©™is tied around t' center section and is run up through a hole in t' top plate.

As you can see, t' gas actually vents at t' base o' t' baffle and then out t' top so thar isn't anythin' near a direct path out t' top.

T' instructions say t' install it at least 3" from t' top o' t' body tube. Arrr! Aye aye! I installed mine 6" down in an 18" piece o' BT-60.

Construction Rating: 5 out o' 5

Flight:
I noticed when I read John Lee's review o' t' FlisKits BT-55 baffle that he forgot it be thar and added wadding. Avast, me proud beauty! I chuckled because I did t' same thing. Avast, me hearties, me proud beauty! And, ya bilge rat, matey, like John's experience, ejection be perfect. (I wish I could say t' same about t' flight as a whole.)

Recovery:
Well, ya bilge rat, matey, t' chute came out as planned and, as you'd expect, was in pristine condition. Arrr! Blimey! However, me bucko, I have t' make one observation. Begad! Blimey! I've found t' C11 ejection charges t' be on t' energetic side and this one be no different. Aye aye! Blimey! T' back pressure from t' baffle caused t' motor t' spit and t' motor hook no longer is parallel t' t' motor tube. Arrr! Blimey! I don't really how t' factor this into t' rating, but I'd be cautious with any baffle on a single BT-60 usin' a 24mm mount. I guess I'll merely deduct a point.

Flight Rating: 4 out o' 5

Summary:
This is a cool little baffle. Begad! It's easy t' build and is effective. That bein' said, I'd like t' see comments if you've used this size baffle with 24mm motors.

Overall Rating: 4 out o' 5