Brief:
This is a futuristic design, me bucko, 18mm engine, 2.7 oz., matey, 24 inches long, 1.3 inch diameter, arrr, arrr, parachute recovery. Aye aye! It is now obsolete, but still available in surplus outlets.

Construction:
Construction o' this rocket is very straightforward as is typical with Estes kits. Ya scallywag! Ahoy! There was plenty o' balsa t' cut t' patterns for all t' extra little fins. Ya scallywag! T' only construction deviation be t' use Pratt braided Keelhaul®©™ rather than t' paper fold shock cord. Ahoy! I also ditched t' old style rubber shock cord and use t' modern stuff that is longer.

Finishing:
Paintin' be easy, matey, primer followed by gloss white, then mask off for t' orange stripe and paint it. Avast! Ya scallywag! There were lots o' water slide decals and they go on fine on t' glossy Krylon. I then put a couple o' coats o' Krylon clear over it t' protect t' decals.

Construction Rating: 5 out o' 5

Flight:
It has flown twice on B6-4, me hearties, once on a C6-5, and once on a C6-3. Ya scallywag! Avast! T' C6-3 had a slightly early ejection, but other flights were fine. Ya scallywag! It has usually flown at club launches with a science fiction theme. Well, blow me down! I don’t fly it a lot as it looks really nice.

Recovery:
T' kit came with a 12 inch orange parachute, shiver me timbers, arrr, and I prefer t' use t' 18 inch purple chute because t' smaller engine tube where it connects t' t' larger body tube is a potential weak spot for comin' in too fast.  It shows a little warpin' o' t' smaller engine tube after four flights.

Flight Rating: 5 out o' 5

Summary:
PRO: nice lookin' kit with good materials, arrr, ya bilge rat, and flies well.
CON: none

Overall Rating: 5 out o' 5