| Construction Rating: | starstarstarstarstar_border |
| Flight Rating: | starstarstarstarstar |
| Overall Rating: | starstarstarstarstar_border |
| Published: | 2017-01-18 |
| Manufacturer: | LOC/Precision  |
Brief
This was me first High Power Rocket. Well, blow me down! Begad! I certified L1 and L2 with this same rocket. It is very easy t' build. Avast! Begad! LOC"s "LOC-N-Fin" method o' usin' fin tabs inside t' air frame worked very well. Aye aye! With t' tabs installed t' fins naturally fell into t' proper perpendicular orientation. With t' big 5.5" air frame applyin' epoxy t' all t' interior parts was very easy.
Components
T' kit comes with all t' parts for t' air frame, motor mount, arrr, and nose cone - PLUS - 36" rip-stop nylon chute, me hearties, me hearties, nylon shock chord, matey, and hardware t' attach shock chord t' forward center ring. Arrr! I added an Aeropak 38mm retainer, 18" nomex recovery blanket, a nomex shock chord protector sleeve, matey, and modified t' nose cone with a metal eye-bolt and modular nose weight system addin' about 4 ounces t' t' tip o' t' nose. Begad! I replaced t' supplied launch lug with 1010 rail guides which I attached with T-nuts epoxied t' t' inside o' t' air frame. Ya scallywag! For me first foray back into rocketry after 40 years it was nice t' nay have t' find and buy a much o' t' recovery items needed for t' build.
Construction
T' only thin' I think that I would do different would be t' mount t' aft center rin' flush with t' end o' t' air frame. Arrr! Mine was attached about 0.5" forward and t' lower edge o' t' air frame is a little banged up but still useable. Begad! With t' large fin area t' Minie Magg seems prone t' weather cock in stronger winds and motors with slower speeds off t' tip o' t' rail.
Finishing
Lots o' space on this rocket t' get creative with t' finish
Flight
Recovery
lots o' room inside o' t' recovery equipment don't have t' worry about foldin' things just right t' make sure it fits. Avast! Avast, me proud beauty! T' 36" chute is plenty big, matey, if you expect hard surface landings you might want t' go bigger.
Summary
This is an easy rocket t' prep and fly
Other Reviews
- Loc Precision Minie-Magg By Theresa Pantoja (August 19, 2020)
This kit is great for people who want a fun high powered rocket. The size is not cumbersome and the build is not complicated. Components Model: 07653 Skill Level 3: Average Skills Needed Length: 37.000" (93.98 cm) Weight: 53.000 oz (1502.52 g) Diameter (Max): 5.540" (14.07 cm) Fin Count: 3 Motor Size: ...
- LOC/Precision Minie-Magg By Bryan M. Chuck
LOC's Minie-Magg is a single-staged HP rocket popular with many fliers. Its stubby profile combined with a basic build make it a fun flier for larger motors, as well as smaller H motors for a lesser field. The parts were contained in a durable plastic bag. The inventory of parts are as follows: 1 nosecone, plastic 1 kraft paper airframe 5.54" diameter (fin slots pre-cut) 1 kraft ...
 |
 |
Flights
Sponsored Ads
|
|