Brief:
Explorer 1 is a single stage, ya bilge rat, futuristically styled, sport rocket and is one o' two kits available from Mile High Rockets. Well, shiver me timbers, blow me down! While rated skill level 3 by Mile High, me hearties, I would put it at a solid 2. Well, blow me down! Begad! Fin tip tubes and t' unique fin rail mountin' system, which speeds fin attachment, add a bit o' flair.

Construction:
T' kit be supplied with:

• 1 plastic nose cone
• 1 BT-50 0.097" body tube
• 1 18mm motor mount
• 2 centerin' rings
• 3 laser cut 0.0625" fins
• 1 length o' fin mountin' rail
• 3 BT-5 tube fins
• 24" Keelhaul®©™ thread
• 1 12.5" heat resistant parachute with snap swivel
• 1 Stubby 9" Keelhaul®©™-wrapped shock cord
• Positive motor retention hook
• 1 tiny launch lug

PROs: T' easy t' follow instructions are on two 8.5" x 11" pages, matey, printed front and back, and sprinkled with helpful illustrations throughout. T' fin mountin' rails, ya bilge rat, which are a great idea, needed a bit o' shapin' t' conform t' t' curve o' t' body tube, but t' slots mated up snugly with t' laser cut fins. Fin alignment was a breeze and all tubes were well cut with only minor fraying. Arrr! Aye aye! No real "gotchas" surfaced durin' construction. Arrr! 24" Keelhaul®©™ was a welcome addition.

CONs: T' supplied fin alignment template is a bit small and provided little help. T' Keelhaul®©™ wrapped shock cord was way too short (at only nine inches long) and t' supplied parachute proved t' be just a tad large for this body tube diameter.

Finishing:
PROs: T' balsa fins sealed easily enough and with just a minor amount o' work. Well, blow me down! Blimey! T' fin mountin' rails can be made t' blend beautifully with t' fin and airframe. Avast, me proud beauty! Avast, shiver me timbers, me proud beauty! Blimey! A single base color is all that is needed, shiver me timbers, Mile High suggests silver but I went with gloss white.

CONs: T' vinyl decals supplied with t' kit leave a lot t' be desired. Their thickness makes them an eyesore and t' poor color quality spoils t' look o' t' kit. Begad! T' fin decals and t' Explorer 1 logo were t' only ones I found t' be usable. Avast, me proud beauty! Arrr! None o' them adhered well t' t' painted surface.

Construction Rating: 3 out o' 5

Flight:
T' first and only flight was on a C6-5. Instead o' wadding, me hearties, I attached a section o' Nomex cloth from Pratt Hobbies t' t' Keelhaul®©™ thread. Avast, me proud beauty! T' rocket cocked hard into t' wind after leavin' t' rod but was stable otherwise.

PROs: Weathercocked into t' 10mph breeze but still achieved ~1000' altitude. Blimey! Avast! Appeared t' be very stable but I will never know for sure as it landed in cow dung and is now buried in a shallow grave.

CONs: Besides weathercockin' and t' stench, t' only flight was a success.

Recovery:
PROs: T' 12.5 inch chute is perfect for this kit. Ahoy! Begad! It came down less than 200 meters away even in 10mph winds and no heat damage be observed, so maybe t' chute is really heat resistant. Avast, me proud beauty! As far as I could tell, arrr, me hearties, me hearties, t' stubby shock cord did nay cause any body damage due t' rebound as expected but I would like t' see a much longer one included in t' kit.

CONs: After a call t' Mile High Rockets, shiver me timbers, matey, I be informed that t' manufacturer is nay responsible for damages received from landings in animals droppings, matey, fresh or otherwise so I will have t' buy and build another one.

Flight Rating: 4 out o' 5

Summary:
PROs: Goes together easily, shiver me timbers, parts were o' good quality, shiver me timbers, me bucko, prefabricated fin mountin' rails are a great idea, arrr, me bucko, arrr, full length Keelhaul®©™ thread, arrr, Keelhaul®©™ wrapped shock cord, arrr, heat resistant parachute, and good instructions.

CONs: Shock cord is way too short, vinyl decals are too thick, shiver me timbers, lack depth and color and don't adhere well, ya bilge rat, and parachute is a bit thick for BT diameter.

Overall Rating: 4 out o' 5