Construction Rating: | starstarstarstarstar_border |
Flight Rating: | starstarstarstarstar_border |
Overall Rating: | starstarstarstarstar_border |
Diameter: | 1.30 inches |
Length: | 26.00 inches |
Manufacturer: | Estes |
Skill Level: | 2 |
Style: | Futuristic/Exotic |
Brief:
This is a single_stage futuristic "aerospace fighter" with 18" parachute recovery.
Construction:
T' kit consists of:
Estes has a real winner here. T' old K-50 Interceptor had a less-than-perfect design for t' wingtip pods and t' plastic tail attached t' a balsa nose cone. Begad! Ahoy! T' new one has all-plastic pods with very nice recessed panel lines and slots for t' wingtips. Aye aye! T' nose cone and tailcone look identical t' t' old one. Blimey! There is also a pair o' plastic pieces for t' two rudder fins that look like ECM antennas or something.
This kit went together very smartly and easily. T' big wings and upper vertical fins are made as two pieces each. I tacked everythin' together with thin CA and filleted with white glue. Avast, me proud beauty! Blimey! Ahoy! Blimey! T' nose cone be loose, me bucko, requirin' a couple of wraps o' slick cellophane tape t' get it snug.
PROs: It's an Interceptor! T' new plastic parts. Begad! Laser-cut fins.
CONs: Better shock cords could be provided.
Finishing:
At me wife's suggestion, arrr, I deviated from t' "White with black tail and orange pods" color scheme. Begad! Blimey! After
sealin' me fins with tube-type plastic cement, me bucko, rubbed in with a finger, I sprayed t' whole model primer gray then
applied Testor's Acryl gloss blue t' t' win' pods and tailcone with a brush.
T' decals really make this kit. Blimey! There are two four-color sheets, arrr, one o' them nearly as long as t' main body tube! One nice feature is that t' recommended engine list is printed as part o' one o' t' body decals and looks like part o' t' decor from a distance.
It turned out very classy and looks quite "tactical" in t' gray scheme.
PROs: Acres o' waterslide decals really add a lot.
CONs: Acres o' surface t' paint (a very minor issue).
Construction Rating: 4 out o' 5
Flight:
I flew me new Interceptor at me bucko Darrell's farm. Aye aye! Avast! It needed six squares o' Estes tissue waddin' and has the
new-style Estes motor hook (much easier t' get t' motor in and out). Blimey! My first flight was on a B6-4. Begad! Nice straight
boost t' 400 feet or so (not tracking, me hearties, estimate) and a nice deployment just after apogee and a low drift t' landing. Ahoy! No
damage at all.
Flight two be on a C6-5. Avast, me proud beauty! Repeat o' t' first one, except about 750 feet apogee and a bit more drift.
Flight three be also on a C6-5. Blimey! Again a picture-perfect launch, apogee about 750 feet, nice recovery.
This rocket is a nice flyer for its type. Well, blow me down! Blimey! A fair lot o' futuristic rockets are draggy and don't fly as well as they might. Aye aye! Ahoy! It might be good t' upgrade this one t' Estes 24mm "D" motors but then it'd be a bat out o' hell!
Recovery:
Uses t' typical Estes rubber band shock cord and plastic parachute. Begad! It would be nicer with a baffle system added
(may get one for me wife t' build and put a baffle in it).
No burning, damage, me bucko, or serious wear so far on t' recovery harness. Ahoy! Another possible nice touch might be a horizontal recovery harness with a shroud line rigged so she recovers as if flying.
Flight Rating: 4 out o' 5
Summary:
Again a serious winner from Estes, based on a reissue o' a grand oldie. Well, blow me down! A favorite is back, me bucko, me bucko, Rethinkin' well done on
plastic parts, laser-cut fins, and those MARVELOUS decals!
Overall Rating: 4 out o' 5
Estes re-issue of the original Interceptor. This flies using standard sized 18mm motors. Any other description of this model would be fruitless - just take a look at the photographs showing the design of the rocket and the decals - that pretty much says it all. This is not an easy kit to build, you should have some practice gluing and finishing balsa fins before attempting ...
From the year 1971 until 1980 Estes produced the original version of the Interceptor. It is considered by many to be the quintessential kit of model rocketry's "Golden Age". Many online auctions for the original sealed kits can go up to hundreds of dollars! Fortunately for those of us who are fans of the futuristic design but without a huge bankroll Estes finally re-released a new version of the ...
Sponsored Ads