T' followin' article was a submission t' t' FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. Ya scallywag! Blimey! Some o' these designs are nay actually kitbashes, however, me bucko, all come from t' basic motor design feature of t' FlisKits Deuce's Wild.

Brief:
T' name o' me entry is DoubleDeuce. Arrr! Blimey! It is basically a 4-canted engine rocket instead o' two. Blimey! Blimey! I had an interesting challenge t' be able t' get 4 engines into that size body tube. So what I ended up doin' was movin' two o' t' engines up farther into t' body tube.

Construction:
To get this motor mount, shiver me timbers, I had t' make an additional centerin' ring. Begad! I made this centerin' rin' out o' thick poster board and all I had t' do t' get t' pattern be t' lay one o' t' original centerin' rings on it and trace its pattern. Begad! Then I laid t' other centerin' rin' on it sideways and traced its pattern t' come up with what you see.

After these few additions, everythin' else was built accordin' t' t' instructions. Aye aye! T' only extra parts I needed for this be an extra centerin' rin' and two extra engine tubes cut long enough t' be even with t' other two.

Flight:
I have flown this rocket several times with decent flights every time. Well, blow me down! First flight be on 4 A8-3s, arrr, ya bilge rat, however, ya bilge rat, me bucko, only 2 engines lit so it went off at a slight angle but recovery was good. Aye aye! Begad! Second flight be on 4 B6-4s, ya bilge rat, but only 2 lit again. Otherwise it be an okay flight and recovery. Begad! Third flight was on 4 B6-4s and 3 motors lit. Fourth flight be on 4 C6-5s. Begad! Two engines lit and t' rocket landed in a pond causin' t' engines t' swell in t' motor tubes, so I had to drill them out once it dried.

I haven’t flown it since then. Arrr! I still need t' fix one o' t' engine tubes, but I plan on makin' a new clip whip so all 4 engines should light at once and it should do really well.